Hi,
I probably have posted in the wrong section so sorry about that.
However I have built one of those gm328 component testers and am getting a white screen on power up. Can some one help me out please?
Things I have tried so far:
- Checking mcu with avrdude using a usbtiny ISP. The chip wouldn't give a signature so replaced it with another m328p.
- Tried flashing various fw from links in this forum.
The version of product is the colour TFT gm328 with rotatory encoder and frequency generator. I got it from amazon.
https://www.amazon.co.uk/KKmoon-Transistor-Capacitance-Frequency-Generator/dp/B01HCU8VTM/ref=sr_1_3?ie=UTF8&qid=1551291890&sr=8-3&keywords=kkmoon+gm328Hope someone can point me in the right direction with fault finding this? Hopefully I have built it correctly and its just a firmware issue?
Cheers!
Definitely wrong zone, but ...are you using a decent power supply?
Those kits are infamous for white screens when using crappy batteries.
G'luck!:-)
it's NOT a GM328, those are green backlit monochrome.
it's an "AY-AT" from some scumbag seller using the wrong description to get more search hits.
the difference is important if you want to flash it - try AY-AT firmware.
I had the same behavior on first power up of my GM328 2018 kit. The problem was fixed after I resoldered the male pin header for the display.