The switch is 29mm from the buttons to the edge of the PCB. (the original one)
Height is about 16.15mm inside the box, and 18 outside.
With the new pcb mounted it's 29mm from the front of the box to the edge of the PCB.
Has anyone found a source for KM2 switches that come with the two end bits? Sellers on ebay and aliexpress only seem to sell just the switches alone.
The ones I linked earlier in the thread came with endbits.
Don't know if they always do or it was just luck, but I guess I'll know soon since I ordered a few more of them.
Payment sent, check PM, thanks for making this available.
Payment sent for 2x pcbs set and 2x 1% resistors set plus shipping.
Thank you!!!
The original PCB is fixed by melted plastic that has to be cut to replace the board.
So, how do you fix the PCB on the switch?
If you are concerned, glue.
But it's a tight fit so you shouldn't need to.
Fortran, I would like to buy some PCBs.
I just sent you a PM regarding the payment.
Yes I will hand solder a few sets for those who aren't able to solder themselves.
It is hard to work for free - don't do it
Working for free is easy!
It's earning money that's hard
Are there some kits left? If so do I PM for Paypal account info or you just tell me (and the price)
I am in the US
6 PCB's = 1.50 USD
1% resistors for 6 boards = 1 USD
0.1% resistors for 6 boards = 14 USD
Shipping worldwide = 3 USD (good for about 6 kits)
So a kit with 6 boards, 1% resistors and shipping is 5.50 USD
A kit with 6 boards, 0.1% resistors and shipping is 18.50 USD
Simply add up the stuff you want and send that sum via PayPal to dldm04@gmail.com, along with your list and address.
There is only one 0.1% kit left and 12 of the 1% kits.
If demand remains I'll order more resistors.
Boards are pretty much infinite.
Ill be getting some in the coming weeks... once i have saved up my pocket money (A grown ass man saving pocket money
)
6 PCB's = 1.50 USD
1% resistors for 6 boards = 1 USD
0.1% resistors for 6 boards = 14 USD
Shipping worldwide = 3 USD (good for about 6 kits)
So a kit with 6 boards, 1% resistors and shipping is 5.50 USD
A kit with 6 boards, 0.1% resistors and shipping is 18.50 USD
Simply add up the stuff you want and send that sum via PayPal to dldm04@gmail.com, along with your list and address.
So 4 1% kits =
4x1.5 = 6
4x1 = 4
subtotal 10
One .1% kit
1.5 + 14 = 15.50
subtotal 15.50
ship = 3
total $28.50 for 4x 1% kits and 1x .1% kit? (5 kits total) right ?
thanks
You've nailed it.
That means there are no more 0.1% kits left (assuming you pay and all that).
If anyone want one, drop a comment in the thread or PM and I'll order new ones if demand is close to 10 sets.
You've nailed it.
(assuming you pay and all that).
Do I need to PM you my address or does Paypal send it to you?
thanks
If you send as "family or friends", you'll need to PM or email me your address.
I like friends.. they don't cost me anything in transfer
I'd be interested in 2 .1% kits when you have them. Thx...
Alright. 8 more and I'll order.
I have not studied the switch or the PCB. For the thumbwheel switch, does the code type matters (BCD or Decimal) ?
I've bought both.
Only the pcb differs.