I don't know what they're like used in single shot modes.
In single shot it's perfect. Turn on the zoom (swipe down/up with three fingers) and then can navigate and zoom in/out the 28M stored samples. Perfect!
I'm pretty sure I missed some basic setting or something. But with the built in memory I expected to be able to change timebase and signal level in single aquisition mode to inspect the signal. However, the traces just disapear as soon as I change eg. the timebase?
Sorry if it is obvious
However, the traces just disapear as soon as I change eg. the timebase?
So you captured a waveform, started to play around with it, and it disappears? I think I had the same issue. Try pressing stop button.
single aquisition mode to inspect the signal
Maybe you are confusing "single" with normal trigger mode?
I expected to be able to change timebase and signal level in single aquisition mode to inspect the signal. However, the traces just disapear as soon as I change eg. the timebase?
Is the Trigger X position at or very near the center on the screen.
@sixtimesseven you have got to either put it in "single seq" (== single shot) or put it in stop before touching anything else.
Thank you all for replying!
Well that makes sort of sense.
I was just confused. For example on the RTB the scope does retain the trace when in normal and the trigger is lost. Not so on the Micsig apparently...
Single SEQ is basicaly a Single acuisition in Normal trigger mode then?
I have to say though -- Im impressed by there scopeSuite software. Connects seemlessly over wifi and is really responsive.
Interesting that they do not advertise that feature.
http://en.micsig.com.cn/html/list_64.html"ScopeSuite_tBook mini Only support Wi-Fi no need NI-VISA Driver"
I was using one of these recently and I came up on a problem. Is there any way to do fine horizontal and vertical adjustments?
I was just confused.
Me too, I'd prefer the trace to stay.
Btw, any recent firmware updates? I tried to check for updates on my oscilloscope, but it was producing a confusing error, presumably meaning "connection timeout".
I was just confused.
Me too, I'd prefer the trace to stay.
Btw, any recent firmware updates? I tried to check for updates on my oscilloscope, but it was producing a confusing error, presumably meaning "connection timeout".
Well, I would suspect it to be here:
http://en.micsig.com.cn/html/list_60.htmlBut for all I know of Micsigs logic it might be burried in a random page
I have to say though -- Im impressed by there scopeSuite software.
Their screen graphic of the scope looks much better than the actual real scope.
Is there any way to do fine horizontal and vertical adjustments?
It's mentioned in some of the other threads on here, there are no fine Y or X adjustments.
Btw, any recent firmware updates? I tried to check for updates on my oscilloscope, but it was producing a confusing error, presumably meaning "connection timeout".
Even the firmware updater can't find its way around their site.
Hi folks, i've got one of these scopes coming to me and wanted to know the actual screen size and any recommendations for a non reflective screen protector i can order, as the image & video reviews seem to show a lot of reflection issues?
Whats the touch function like with a screen film fitted?
Thanks in advance for any advice
Thanks for the reply, what dimensions are the working area & visible area of the screen?
I was thinking to buy a generic or other make tablet screen film to try, as you have to strip the surround off the Micsig to fit the original.
Thanks
I'm interested in buying the 2 channel / 150 Mhz version called the TO1152+.
I cant find a reference on the Micsig site about this model, and no firmware update that has TO1152 in it.
Are there no firmware updates for this model or is it compatible with another update for a TO1XXX model.
Can Anyone share his experience with this model?
Hi guys, just received my TO1104+, setting it up. For some reason, it doesn't connect to my WiFi.
The WLAN setup page shows the available networks, and I entered the pass code for my home network.
Then it goes to 'Wait for connecting ...' indefinitely.
I've repeated the setup, switched it on and off, no change.
In the user guide it talks about a WLAN setup dialog for automatic or manual configuration but I don't see that on the page.
Any pointers for me?
Edit: it just connected, after another on/off cycle. Funny enough, in the setup it shows my network twice.
It's not the alternative frequency band, but the exact same it is connected to.
Ohh well, I'm not complaining!
Jan