Got the new scope, it's running firmware version 00.04.03.SP1... any major fixes or changes or issues with going to the latest firmware version of 00.04.03.SP2 or 00.04.03.02.03 (full version).. can not seem to locate a "fix list" with the new version.. do they not post that, i.e. "this firmware addresses.. blah blah blah"
Just curious what others have done.
thanks
David
The SP2 firmware did fix a couple of issues that I personally found annoying, but introduced a couple more annoying issues. For my purposes the first point outweighs the second point. But YMMV of course.
Since it is apparently impossible to "roll back" to an earlier version of the firmware, I would advise researching the issues carefully before deciding whether to upgrade to SP2 or not. Myself... I just hope they issue a new firmware update _soon_, that fixes the new annoying issues associated with the SP2 update (the "Pluses" spelling error and the Measurements Fail with Math On bug.)
I've never been able to decode the Chinglish in the changelogs into any language that I can understand. And it seems from my experience that some fixes aren't listed in the changelogs and some things that are listed don't apply to my scope. But that could be down to my lack of understanding of the language used in the changelog.
Got the new scope, it's running firmware version 00.04.03.SP1... any major fixes or changes or issues with going to the latest firmware version of 00.04.03.SP2 or 00.04.03.02.03 (full version)..
I recently updated to firmware 00.04.03.02.03 and now the USBTMC command :WAV:DATA? is no longer working in RAW BYTE mode. It was working fine before with firmware 00.04.03.01.05 (= 00.04.03.SP1).
I recently updated to firmware 00.04.03.02.03 and now the USBTMC command :WAV:DATA? is no longer working in RAW BYTE mode. It was working fine before with firmware 00.04.03.01.05 (= 00.04.03.SP1).
I guess there's a problem with your software. Here it works fine with the latest firmware and DSRemote.
No problem or whatsoever whith the command :WAV:DATA? in RAW BYTE mode.
I recently updated to firmware 00.04.03.02.03 and now the USBTMC command :WAV:DATA? is no longer working in RAW BYTE mode. It was working fine before with firmware 00.04.03.01.05 (= 00.04.03.SP1).
I guess there's a problem with your software. Here it works fine with the latest firmware and DSRemote.
No problem or whatsoever whith the command :WAV:DATA? in RAW BYTE mode.
I had the problem when using python-usbtmc version 0.6 under OS X. I have since tried the same Python library under Ubuntu Linux and it works fine. This appears to confirm what Karel said, that the firmware update was not the problem.
This appears to confirm what Karel said, that the firmware update was not the problem.
Don't take my word for it. Grab DSRemote and see for yourself. It's free after all.
My first post to this group so if I'm in the wrong place please point me gently in the right direction.
I'm a new owner of a DS1054Z which was delivered with version 00.04.03.SP2.
Has anyone verified that license codes generated at
http://gotroot.ca/rigol/riglol/ are valid for this firmware version. My attempts to use codes generated there with UltraSigma command :SYSTem:OPTion:INSTall <license> have not been successful.
Thanks for any assistance
Andy
Connect the scope via LAN. Remove the USB cable (if any).
Use telnet or putty.
Check with the command *IDN?. Scope should respond with model and serial number.
Then enter :SYST:OPT:INST <key>
Have fun.
Thanks for the quick reply.
I had no problem connecting with UltraSigma and *IDN? returns the model, serial, and firmware version correctly.
I have just been able to successfully enter the code by direct entry on the scope so the codes are good for this firmware version!
I assume I must be making a mistake in the command syntax for UltraSigma. The programming guide says:
Example
:SYSTem:OPTion:INSTall PDUY9N9QTS9PQSWPLAETRD3UJHYA
But
:SYSTem:OPTion:INSTall RDJ9JBBN3SWWUSGJ9A8UJQ8ZXBFA
results in
-> :SYSTem:OPTion:INSTall RDJ9JBBN3SWWUSGJ9A8UJQ8ZXBFA
<- (Return Count:0)
* Error£¡£¡£¡
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
The same code works when directly entered on the scope.
I'm very happy that the codes work and am not too concerned that I couldn't enable with UltraSigma.
Thanks for a great forum and also to all those that share their "discoveries".
Andy
But
:SYSTem:OPTion:INSTall RDJ9JBBN3SWWUSGJ9A8UJQ8ZXBFA
results in
-> :SYSTem:OPTion:INSTall RDJ9JBBN3SWWUSGJ9A8UJQ8ZXBFA
<- (Return Count:0)
* Error£¡£¡£¡
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
Try:
:SYST:OPT:INST RDJ9JBBN3SWWUSGJ9A8UJQ8ZXBFA
Same result:
-> :SYST:OPT:INST RDJ9JBBN3SWWUSGJ9A8UJQ8ZXBFA
<- (Return Count:0)
* Error£¡£¡£¡
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
That's not surprising since the command line parser should accept either the full, or the partial, commands.
I may still be missing something but I'm not going to fret about it. Too many new features to learn.
Andy
The UltraSigma software is garbage. I'm surprised you got any response out of it at all.
That's not surprising since the command line parser should accept either the full, or the partial, commands.
There are a lot of things that Rigol's oscilloscope firmware should... but doesn't.
That's not surprising since the command line parser should accept either the full, or the partial, commands.
There are a lot of things that Rigol's oscilloscope firmware should... but doesn't.
Heh.... and the inverse is true also. There are several things the firmware does do... but shouldn't.
If the upgrade serial has been applied are you able to upgrade firmware like normal?
If the upgrade serial has been applied are you able to upgrade firmware like normal?
In my experience, yes. And I'm not aware of any posters who reported the opposite.
Hello.
I've just received mine.
About the unlocking options, the new firmware accepts the DSFR option? Or we still have problems with the 500uV?
Thank you.
I've just received mine.
About the unlocking options, the new firmware accepts the DSFR option? Or we still have problems with the 500uV?
a) Wait a day or two, make sure it works first.
b) 500uV doesn't work. It's a hardware limitation, don't do it.
I've just received mine.
About the unlocking options, the new firmware accepts the DSFR option? Or we still have problems with the 500uV?
a) Wait a day or two, make sure it works first.
b) 500uV doesn't work. It's a hardware limitation, don't do it.
Ok, thank you for the tips.
Regards
Sent from my ALE-L21 using Tapatalk
I just found firmware 04.04
here. Works on my "1104" and my options are still active.
Release notes:
[Updated Contents]
--------------------
v00.04.04.00.07 2016/07/19
- Added the full-screen display in the XY mode
- Modified the Trace data of average sample mode
- Fixed the bug of system halted for wave persistance in the Zoom mode
- Fixed bugs about Measure
Release notes are not up to date. :-/
I was eagerly waiting for the Full Screen X-Y feature.
I dared to update and managed not to brick my scope :-)
Now there is an additional button where you can switch between SPLIT and FULL.
All options are still there (including 100MHz).
Here are some screenshots of a 10.7MHz filter with the new full screen option.
Have you noticed that the button is labelled SPLIT when in split mode and FULL when in full mode? Shouldn't it be the other way round, so that the label tells you what will happen if you push the button?
However I'm happy anyhow.
73 de OE2WHP
There's a v00.04.04.03.02 out, dated 2017/02/06,
http://int.rigol.com/File/ProductSoftWare/20170419/DS1000Z(ARM)update.rar[Updated Contents]
--------------------
v00.04.04.03.02 2017/02/06
- Improved the LXI module
- Fixed the freeze problem when upgrading based on the boot version of
0.0.0.13
- Improved the menu in the language of Traditional Chinese and Korean
- Modified the failure when downloading waveform to the source module
- Fixed bugs about reading the memory data through SCPI commands
- Fixed bugs about Measure
- Fixed bugs about Filter
[History]
-------------
v00.04.04.01.01 2016/09/14
- Supported the multi-inteface of LXI
- Fixed bugs about Measure
Works for me
