This thread is officially an embarrassment. Would someone do humanity a favor and rename/lock/move/delete it?
+1 it needs some serious moderation
The whole thread had a funny smell from the beginning.
This thread is officially an embarrassment. Would someone do humanity a favor and rename/lock/move/delete it?
Why on earth are such actions required ?
What this thread
really needs is a result whether it be good or bad for the OP doesn't matter so much, what
really matters is how we will gauge KS's support/warranty/aftermarket service when that result is known.
That it hasn't been resolved thus far is surprising, we're ~1 week on now and haven't heard from the OP for nearly a couple of days in Reply #247.
Further updates would've been nice, let's hope nondisclosure agreements aren't the reason for the deafening silence.
If it isn't obvious, it needs moderation because this a test and measurement sub of an electronics forum.
A company's reputation can be damaged by malicious insults. This is Norwegian law:
§ 247. Any person who by word or deed behaves in a manner that is likely to harm
another person’s good name and reputation or to expose him to hatred, contempt,
or loss of the confidence necessary for his position or business, or who is accessory
thereto, shall be liable to fines or imprisonment for a term not exceeding one year. If
the defamation is committed in print or in broadcasting or otherwise under especially
aggravating circumstances, imprisonment for a term not exceeding two years may be
imposed.
Thanks, you just confirmed (again) your stupidity. Kim Jung would like to hire you.
what really matters is how we will gauge KS's support/warranty/aftermarket service when that result is known.
That it hasn't been resolved thus far is surprising, we're ~1 week on now and haven't heard from the OP for nearly a
couple of days in Reply #247. Further updates would've been nice, let's hope nondisclosure agreements aren't the
reason for the deafening silence.
Exactly!
Hello everyone!
I did not reply earlier because I was out of town since we had a holiday here. I also wont reply to posts about Brazil, Nowergian laws or Logitech mouses, since this is not what this discussion is all about
This is about my experience with Keysight customer support regarding my specific case and that's what Im here to talk about.
Daniel got back to me on friday by e-mail. A warranty extension to cover for the repair has been approved and they are now taking care of some internal matters to proceed with the repair. Keysight Brazil still hasnt got back to me and the oscilloscope is still on the bench waiting for things to finally come together so they can proceed with the repair.
Once again I'd like to thank Daniel and Keysight for taking the time to look into this.
I will keep you guys posted as I believe many of you are waiting to know the final outcome of all this discussion that has been going on for days
I also wont reply to posts about Brazil, Nowergian laws or Logitech mouses, since this is not what this discussion is all about This is about my experience with Keysight customer support regarding my specific case and that's what Im here to talk about.
^This!
With some special things this forum have tight moderation but then with this kind OT things this is like worst scrap heap where brats throwing shit and others applauding.
Hello everyone!
I did not reply earlier because I was out of town since we had a holiday here. I also wont reply to posts about Brazil, Nowergian laws or Logitech mouses, since this is not what this discussion is all about This is about my experience with Keysight customer support regarding my specific case and that's what Im here to talk about.
Daniel got back to me on friday by e-mail. A warranty extension to cover for the repair has been approved and they are now taking care of some internal matters to proceed with the repair. Keysight Brazil still hasnt got back to me and the oscilloscope is still on the bench waiting for things to finally come together so they can proceed with the repair.
Once again I'd like to thank Daniel and Keysight for taking the time to look into this.
I will keep you guys posted as I believe many of you are waiting to know the final outcome of all this discussion that has been going on for days
Are you going to change the idiotic "Oh NO! I'm never buying any Agilent Keysight equipment ever again! " or are you going to let that insult stand? I don't think Keysight should have given you anything, for the record.
AMI, is it possible to change the title of a thread? And does it propagate through all the messages?
AMI, is it possible to change the title of a thread? And does it propagate through all the messages?
Yes, but the current title is perfect.
(well, maybe you could "...in Brazil" to it)
Well I did it anyway, I bought a Keysight product...
No feedback from the OP in 10 days.
I'm not afraid to ask: what's going on with this ?
8 of 10 of my test equp is HP/agilent , and I just love it.
They have released schematics of most of the equip I have (older stuff) like E4432B , 6632B etc.
Try to get info or schematics for a R&S unit , and you will meet the wall of silence.
For a hobbyist HP/agilent is a good choice
Just sad they ruined their forum w. The new layout
/Bingo
Most of my test equipment is also made by Agilent / Keysight and I am very happy with it.
And when something broke, Agilent / Keysight always took care of it, even when it was slightly out of warranty.
I even bought used and defective Agilent / Keysight gear that was still in warranty and it was repaired free of charge.
And if some instrument breaks down out of warranty it is most of the time repairable, because we have Service Manuals available.
A tread like this will not discourage me at all to buy more new and used Keysight test gear.
At the end, I think it will not discourage anyone.
But I agree, the OP should change the title.
Most of my test equipment is also made by Agilent / Keysight and I am very happy with it.
And when something broke, Agilent / Keysight always took care of it, even when it was slightly out of warranty.
I even bought used and defective Agilent / Keysight gear that was still in warranty and it was repaired free of charge.
It sounds like you deal with them a lot.
When you post things like this it might be worth saying:
* How far away is your Agilent / Keysight office?
* How do you contact them? Do you go to the office or is it telephone+postal service? If so, who pays for shipping?
* How much equipment do you buy from them?
* Do you personally know anybody there?
Country is probably important, too. A hobbyist living in Brazil probably doesn't get the same level of service as a big company in a large German city.
1. Well, I am in northern Germany and Keysight has an Office in southern Germany, so may be 700 km away
-Shipment is usually UPS or FEDEX
2. I send them an email and get a RMA usually the same day
3. I don't think I ever bought equipment directly from them, except repair parts. Usually I buy Keysight equipment from:
- Distributor in Germany
- Keysight eBay store
- Used from around the world
4. No personal contact to the German Keysight office
We also used to have very good support in Germany for FLUKE, KEITHLEY and TEKTRONIX, up to like 10 years ago.
That has changed so much to the worst ever experience, since they all merged and centralized everything.
The last time I needed help with a Tektronix scope, I did not even get an answer form the support team in Germany.
No feedback from the OP in 10 days.
I'm not afraid to ask: what's going on with this ?
We took care of him under warranty. It was an unusual situation and it made sense for the warranty to cover it in this case.
No feedback from the OP in 10 days.
I'm not afraid to ask: what's going on with this ?
We took care of him under warranty. It was an unusual situation and it made sense for the warranty to cover it in this case.
That seemed like the wise thing to do considering he was planning on replacing a # of his older equipment.
Hey, KS might even get a look in on supplying those replacements now.
But yet the OP wasn't able to post a public "thank you" into this thread, despite all the effort and good will Keysight Daniel put into resolving his problem. And the offending subject title is still unchanged
We took care of him under warranty. It was an unusual situation and it made sense for the warranty to cover it in this case.
And he didn't have the decency to come in here and say thanks? Uhuh.
I would like to come forward and THANK DANIEL and everyone from this forum and from Keysight who helped me. Keysight fixed the issue and decided not to charge anything. I took some time to come here and tell everyone the outcome because I wanted to test the scope for some time to make sure all was perfect, as the last time the defect took quite some time to show up.
I also learned a lesson: repairing these scopoes is so expensive that I encourage EVERYONE to get an extended warranty
THANK YOU KEYSIGHT!
I have posted a new thread and crosslinked them so everyone knows what happene:
https://www.eevblog.com/forum/testgear/thank-you-daniel-my-faith-in-agilent-keysight-has-been-restored-)/
Maybe you could also change the name of this topic.
For sure. I've only had the pleasure of dealing with Keysight more recently (as I've always been very loyal to Fluke in the past); but now whenever I need new equipment I look to Keysight first before anyone else even if it costs me more upfront.
Their presales and most important aftersales support has been nothing short of spectacular; be it when communicating with them directly or through their eBay store.
So my stance is quite the opposite versus the subject of this thread (:
Fluke has probably no DMM with 7 segment dual display like Keysight U1242C or Brymen BM829S.
Fluke 189 was discontinued.