ATMega328P JTAG Debugger/Programmer Recommendation?

[funycat]

If you are using AS6 the ICE is the way to go, it is very fast and works well in the 328 debugging I've done.

I also made a 100mil adapter board for it to get away from those 50mil connectors:

Thanks for the great design!
And here is my contribution for those who buy the Atmel ICE debugger in the bare PCB form:
Have designed an enclosure for printing on 3D printer.
You can find it published on thingiverse.com at this address: http://www.thingiverse.com/thing:983293

[alank2]

Your case turned out great funycat!

[ebclr]

Found this on taobao appear to be a good accessorize

https://world.taobao.com/item/527019081571.htm?fromSite=main