IYDM, Taking this thread a bit back on track.
Check out Charbax Embedded world W2023 live with 45 minutes of STM coverage with Roman as the presenter (in excellent English :-))
They are giving out free C0 boards.
1. C0 line (follow up on G)
2. H5 series fully pin to pin compatible with F4 line. Secure boot/TEE, Azure & AWS IoT previsioning with a key and certificate at STM Factory level
3. U5 now scalable to 4MB flash and 2.5MB SRAM for graphics framebuffer and NeoChrome GPU accelerator (upgrade from ChromArt)
4. STM32WB Matter demo
5. Contactless USB2 using 60GHZ ST60
6. STM32MP13 single core Ethercat demo's. ST will release realtime OS later this year
7. Overview of GUI solution for STM products
8.Developer packages now on github STM32 MCU developers zone.
https://www.st.com/content/st_com/en/stm32-mcu-developer-zone.htmlhttps://www.st.com/content/st_com/en/stm32-mcu-developer-zone/embedded-software.html9. STLINKV3PWR
10. AI Demo (NanoEdgeAIStudio) TOF STM32F4 CubeAI
11. TSC1614 I3C H5 demo
12. IMU motion sensor LSM16OIS (RISC) LS6VS16X game controller (could have the numbers wrong here)
13. Motor anomaly behavior detection demo
Note: Renesas showed off the first board with the M85 + Helium. STM had nothing of this, even the N6 was announced last year.
Hope the N6 will have Dual USB HIGH SPEED OTG or high speed dual role USB-C (like on the H5), no external ULPI, Ethernet and RGB LCD and larger SDRAM than U5
See M85 versus older MCU's:
https://developer.arm.com/documentation/102787/latesthttps://www.eenewseurope.com/en/st-to-launch-its-first-neural-microcontroller-with-npu/P.S I am not affiliated with ST, just got nothing better to do than writing a summary.
and oh yeah, can sign up for free C0 course and get a board (Guess that only applies in Europe and USA, leaving out the poor chip consumer elsewhere as usual)