« previous next »
Pages: [1]   Go Down

Author Topic: Datron 1062 EPROM set  (Read 764 times)

0 Members and 1 Guest are viewing this topic.

Online TheDefpomTopic starter

  • Frequent Contributor
  • **
  • Posts: 952
  • Country: nz
  • YouTuber Nerd - I Fix Stuff
    • The Defpom's Channel
Datron 1062 EPROM set
« on: January 28, 2021, 09:24:20 pm »
Hi All,
I have been repairing a Datron 1062 and I noticed its EPROM firmware doesn't seem to be online anywhere, so I pulled the chips and dumped the contents, maybe they will help someone one day.

This version is a later one as the unit has 27C32 EPROM's on the digital board instead of 2532's, the 27C32's are mounted on special conversion sockets to alter the pinout to suit the board.

The ZIP file has the firmware for all the EPROM's and some photos showing them in place, as well as a read me file explaining a bit more.

Logged
Cheers Scott

Check out my Electronics Repair, Mailbag, or Review Videos at https://www.youtube.com/TheDefpom
 
The following users thanked this post: croma641, coromonadalix

Offline CJay

  • Super Contributor
  • ***
  • Posts: 4136
  • Country: gb
Re: Datron 1062 EPROM set
« Reply #1 on: January 28, 2021, 09:37:20 pm »
Bang them up on KO4BB as well?
Logged
 

Online TheDefpomTopic starter

  • Frequent Contributor
  • **
  • Posts: 952
  • Country: nz
  • YouTuber Nerd - I Fix Stuff
    • The Defpom's Channel
Re: Datron 1062 EPROM set
« Reply #2 on: January 28, 2021, 09:44:08 pm »
I already did, and sent to Tin (xdevs.com) too.
Logged
Cheers Scott

Check out my Electronics Repair, Mailbag, or Review Videos at https://www.youtube.com/TheDefpom
 
The following users thanked this post: coromonadalix, CJay
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

- - -
-->
EEVblog® Main Site EEVblog® on Youtube EEVblog® on Twitter EEVblog® on Facebook EEVblog® on Odysee