Author Topic: Electronic Design and PC Board prototype  (Read 2299 times)

0 Members and 1 Guest are viewing this topic.

Offline mkwiflyTopic starter

  • Newbie
  • Posts: 1
  • Country: us
Electronic Design and PC Board prototype
« on: February 26, 2016, 10:36:13 pm »
I have a very simple electronic circuit I need designed and a PCB built so I can test a new product. Its a simple sound activated switch on certain frequencies and db output with a battery charger. Anyone give me a good direction to go? Looking for contact information and suggestions.

Thanks
 

Offline tggzzz

  • Super Contributor
  • ***
  • Posts: 23122
  • Country: gb
  • Numbers, not adjectives
    • Having fun doing more, with less
Re: Electronic Design and PC Board prototype
« Reply #1 on: February 26, 2016, 11:08:06 pm »
I have a very simple electronic circuit I need designed and a PCB built so I can test a new product. Its a simple sound activated switch on certain frequencies and db output with a battery charger. Anyone give me a good direction to go? Looking for contact information and suggestions
So, you have an idea and you want someone to design and implement it for you.

It would help if you said where you live, so that you can sort out a spec face to face, and give an idea of how much you will be paying.
There are lies, damned lies, statistics - and ADC/DAC specs.
Glider pilot's aphorism: "there is no substitute for span". Retort: "There is a substitute: skill+imagination. But you can buy span".
Having fun doing more, with less
 

Offline uncle_bob

  • Supporter
  • ****
  • Posts: 2441
  • Country: us
Re: Electronic Design and PC Board prototype
« Reply #2 on: February 26, 2016, 11:34:11 pm »
Hi

One important question on anything like this ---- do you already have it protected by a patent?

Bob
 

Offline Eric_the_EE

  • Contributor
  • Posts: 33
  • Country: us
Re: Electronic Design and PC Board prototype
« Reply #3 on: March 01, 2016, 06:03:12 pm »
I'd be happy to look into it for you, free of charge. Depending on complexity, I can't guarantee that I can finish it for you immediately (I'm a senior Electrical Engineering student in the middle of a semester), but I would look into it free of charge. It sounds like a fun project opportunity, and I love any chance to design PCBs.

email: [email protected]

Cheers
 

Offline Audioguru

  • Super Contributor
  • ***
  • Posts: 1507
  • Country: ca
Re: Electronic Design and PC Board prototype
« Reply #4 on: March 01, 2016, 06:24:24 pm »
"A simple sound activated switch on certain frequencies and db output" is a keys finder product sold at The Dollar Store. You whistle and it beeps. Its battery is cheap and lasts for a long time so it does not need to be rechargeable.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

-->