Electronic Display Design Question

[DonBsquared]

Hi all,

I'm an industrial design student and am extremely new to electronics. I'm looking to create a simple display similar to my attached image, but am not sure what components are at play to create such a result. I imagine there is some sort of display or perhaps an LED matrix behind the rounded black screen, but I can't figure out what. Would I be able to simply place such a display behind the black glass screen or would these be two connected parts?

Any advice or part identification would be greatly appreciated, Thanks.

More images here: https://www.behance.net/gallery/82015019/Beaner-parenting-education-robot-

[ataradov]

Given all the pictures, it would not be practical to have this many individual LEDs. It is likely a round "watch" display like this https://www.buydisplay.com/1-32-inch-color-360x360-round-circle-screen-ips-tft-display-panel-gc9c01

But all the pictures there seemed to be 3D reneders, I would not expect it to look that sharp and high contrast in practice. You can get close though.

And there is no size reference, so it might just be a simple single color OLED display like this https://www.buydisplay.com/square-white-0-96-inch-96x96-oled-display-screen-ssd1317

[coromonadalix]

woah  nice ones