Hello , I have two RAC04-12DC/230 which are connected in layout as shown below.
the component pin are described in the datasheet and the attached table.
The device has 3 modes of operation by which is desided what in the exact role of each pin.
I dont know what mode the devices are in.
Using the attached photos i saw that pins 5 of both devices are connected,also pins 6 of both devices are connected,as shown in the attached layouts.
Also there are +12V -12V line come out i dont know where from.
What could be the logic of connecting these devices in such way?
Thanks.
What could be the logic of connecting these devices in such way?
In which way? Connecting pins 5 and 6? To supply both devices with VAC in (N) and VAC in (L).
Did you read the datasheet?
Hello, Sorry for the late responce.I need to use two type of the componens.
From the attached table I need to use RAC04-12DC/230 to get +-12 and RAC04-24SC/230 to get +24 signe ended.
RAC04-12DC/230 is dual mode from the photo below.
What is the meaning of COM at pin 3 shown in the photo below?
What is the difference between DUAL is single mode with pin output?
https://www.mouser.co.il/datasheet/2/468/RAC04-C_230-1711174.pdf
Hello , so if I want 24v single mode I will use RAC04-24SC/230 and put 24V vout plus , vout minus pin3=GND?correct?
Dual mode:
And if I want +-12V I will use RAC04-12DC/230 Pin2 +12 pin4 -Vout Com=GND?correct?