Author Topic: problem recreating differentiator effect  (Read 978 times)

0 Members and 1 Guest are viewing this topic.

Offline john23Topic starter

  • Frequent Contributor
  • **
  • Posts: 516
  • Country: aq
problem recreating differentiator effect
« on: February 25, 2025, 10:12:27 am »
Hello , I have built a basic PID circuit as shown below.
I put a pulse as input.
The integrator works good it converts the pulse into a ramp . but the differentiator is supoosed to convert the pulse into two spikes.
Why its not happening?
Ltspice file is attached.
Thanks.
 

Offline Conrad Hoffman

  • Super Contributor
  • ***
  • Posts: 2307
  • Country: us
    • The Messy Basement
Re: problem recreating differentiator effect
« Reply #1 on: February 25, 2025, 03:33:40 pm »
Make C2 smaller and raise the gain of the stage (R3 bigger).
 

Offline Grandchuck

  • Super Contributor
  • ***
  • Posts: 1254
  • Country: us
« Last Edit: February 25, 2025, 08:47:57 pm by Grandchuck »
 

Offline john23Topic starter

  • Frequent Contributor
  • **
  • Posts: 516
  • Country: aq
Re: problem recreating differentiator effect
« Reply #3 on: March 07, 2025, 02:05:14 pm »
Hello Conrad Hoffman, adding C2 adds ringing why it that?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

- - -
-->