Hello. This is a completely different product, but I would like to create a soldering station that looks like this.
It is sufficient to be able to display the temperature of the tip on the display like the "QUICKO T12-951". I prefer a simple look.
So my question is, do you think it is possible to obtain the temperature from a commercially available T12 or C245 station and display it on another LCD?
I don't have the skills to use Arduino, etc., and I would like to obtain the temperature of the tip from the existing station controller.
I would be happy to receive your advice or ideas. Thank you in advance!
![](https://img.alicdn.com/imgextra/i2/11406668/TB2dGZ0pXXXXXbYXpXXXXXXXXXX_!!11406668.jpg)
![](https://img.alicdn.com/imgextra/i1/11406668/TB2RLVcppXXXXX.XXXXXXXXXXXX_!!11406668.jpg)
![](https://img.alicdn.com/imgextra/i3/11406668/TB20MRjppXXXXXhXXXXXXXXXXXX_!!11406668.jpg)