« previous next »
Pages: [1]   Go Down

Author Topic: Asix Forte missing some smoke [FIXED]  (Read 320 times)

0 Members and 1 Guest are viewing this topic.

Offline Tim STopic starter

  • Newbie
  • Posts: 7
  • Country: gb
Asix Forte missing some smoke [FIXED]
« on: February 27, 2024, 05:03:24 pm »
Trying to identify the 6 pin device that spilt it's magic smoke. It's an Asix Forte programmer and is an interface/protection between the FPGA and the programming pins.
Case marking is TAR.

Thanks,
Tim.
« Last Edit: March 04, 2024, 12:33:21 pm by Tim S »
Logged
 

Offline Tim STopic starter

  • Newbie
  • Posts: 7
  • Country: gb
Re: Asix Forte missing some smoke
« Reply #1 on: February 27, 2024, 05:53:15 pm »
...forgot to add some dimensions :palm:.
Body is 1.7mm x 1.2mm and it's almost certainly a TVS diode in SOT563 package.
Logged
 

Offline Muxr

  • Super Contributor
  • ***
  • Posts: 1369
  • Country: us
Re: Asix Forte missing some smoke
« Reply #2 on: February 28, 2024, 02:30:09 am »
« Last Edit: February 28, 2024, 02:32:24 am by Muxr »
Logged
 
The following users thanked this post: Tim S

Offline Tim STopic starter

  • Newbie
  • Posts: 7
  • Country: gb
Re: Asix Forte missing some smoke
« Reply #3 on: March 04, 2024, 12:32:16 pm »
All fixed now, thanks Muxr.
Part from Mouser is 595-SN74LVC1T45DRLR for future reference.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee