Fluke 73 Series III service manual

[LateyMatey]

Hi Guys

I have a Fluke 73 Series 3 which does not read DCV correctly (actually, it's an eBay purchase which I've not received yet). Just wondered if anyone has the correct service manual I may obtain before it arrives. The series 2 one seems readily available, but not 3. Is this because its still repaired by Fluke perhaps?
I work as a Calibration Engineer here in the UK, having previously been a production and service engineer so will probably be OK without, but they do make life so much easier, don't they?

Many thanks in advance.

Leighton

[shakalnokturn]

I think the 23 II service manual is very close.

[retiredcaps]

When you get the meter, come back and post the problem.  We can help.

A non Fluke resource that you might find helpful.

http://mrmodemhead.com/

[LateyMatey]

Thanks for your replies guys.

Just as an update. The meter has arrived, its actually a Fluke 75 series III. When it came, I checked it over with the supplied fused probes and nothing, but the meter powered on OK. Swapped the leads from another meter and it seemed to work fine so I took it into work yesterday and gave it a full calibration. Everything was inside specification apart from the 32 Meg range so a bargain meter for the bench.

Thanks anyway