Adapter iFak isCAN USB DIY

[Postal2]

You can make this expensive adapter from cheap components. Sorry for schematic quality, have no time.

[simba15]

Can we know more?

Diy Can adapter would be useful!

[Postal2]

I made it for various vendors software, works fine. What exactly you need to know? I seem schematic is readable, need to be some advanced of course.

[simba15]

I see the schematic , but I am unsure of the main IC's used.

What are the modules shown in the pictures? seems to simply the assembly.

Any firmware required?

Thanks.

[Postal2]

Main IC is accordingly to filename is CY7C68013A-128 (cheap). Small ICs are SN74LVC1G02 (74AHC2G08 is not need and was bypassed). Schematic is reverse-engineered from working device.
Firmware is there in file "iic" - it is for eeprom, as usually for fx2lp.

Small module is SJA1000 module, but need change crystal to 24MHz (it is more stable). Constantly powered. Isolation not used.

[Jtkjake]

I can't seem to get it working 100%. It's coming up as the correct "device", iscan search and finds it and displays the serial. But I can't seem to get the iscantest to complete to make it work.

I can't seem to find anymore information about it.
Happy to pay someone for their assistance and knowledge please.