Author Topic: Advantest R3132 firmware  (Read 2783 times)

0 Members and 1 Guest are viewing this topic.

Offline frettoreTopic starter

  • Newbie
  • Posts: 2
  • Country: it
Advantest R3132 firmware
« on: March 09, 2017, 12:32:39 pm »
Hi,
I'm looking for the firmware of this SA.
My R3132 doesn't complete the boot sequence, and I suspect a CF card corrupted.
Unfortunately I didn't make a copy.
Does anybody knows where to get an image of the CF card?
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 26907
  • Country: nl
    • NCT Developments
Re: Advantest R3132 firmware
« Reply #1 on: March 09, 2017, 12:42:26 pm »
Are you sure you got the right model number? The R3132 doesn't have a CF memory for the firmware.
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 

Offline frettoreTopic starter

  • Newbie
  • Posts: 2
  • Country: it
Re: Advantest R3132 firmware
« Reply #2 on: March 13, 2017, 12:18:34 pm »
I confirm is a R3132, here is a pic of the mainboard
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 26907
  • Country: nl
    • NCT Developments
Re: Advantest R3132 firmware
« Reply #3 on: March 13, 2017, 12:37:43 pm »
That looks way more different from the R3131 than I expected. Sorry.
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 

Offline prot_brot

  • Contributor
  • Posts: 13
  • Country: id
Re: Advantest R3132 firmware
« Reply #4 on: December 25, 2017, 07:56:39 pm »
I know this is an old topic, but just in case if you still need it.

Hope that helps.
 
The following users thanked this post: alm

Offline IW1EPY

  • Newbie
  • Posts: 2
  • Country: it
Re: Advantest R3132 firmware
« Reply #5 on: February 12, 2018, 05:22:17 pm »
my R3132 have lost the narrow band option 27 .No way to recover?
 

Offline rainbow

  • Contributor
  • Posts: 27
  • Country: it
Re: Advantest R3132 firmware
« Reply #6 on: May 16, 2022, 06:48:00 am »
IW1EPY: have you tried to use the R3131 procedure?

Code: [Select]
Use the following sequence to restore the TG option:
<Shift> <9>
Password: 882323 <Hz>
"TG Option >"
"Load"
“Exit”
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf