Probe for oscilloscope Tektronic 2201

[decoder_82]

Hi,

I have an oscilloscope Tektronic 2201 (20 MHz) but I don't have a probe for it.It is supposed to come with a prove P6103 which is not so easy to find.
From here https://w140.com/tekwiki/wiki/2201
It is expecting input impedance with 1 MΩ and 25 pF.

I found a P6103B which I think will not work as the manual says "bandwidth not less than 60 MHz"

What would be suitable probe for this model ?

Thanks in advance !

[Jeff eelcr]

P6103B is the recomended 10x probe for that unit, Tektronix 2201.
Jeff

[decoder_82]

Thanks ! so actually I did not dug enough and indeed the recommended probes for this scope are:
- P6103B (10x 60MHz)
- P6119B (1x/10x 10/100MHz)
- P6101B (1x 15MHz)

[bdunham7]

What would be suitable probe for this model ?

Almost any cheap probe will work fine with that.  The 1M/25pF input just means that any 10X probe needs to have a compensation range that goes up to 25-30pF, which most low-end probes will.  More expensive probes might have a lower compensation range and not work properly.  For 1X it just doesn't matter, they will all work fine.

[decoder_82]

Thanks then my cheap clone P6100 probe should work fine.