Good morning guys,
I just recently bought myself a Rigol DS1052E and was playing around with it. Wanted to do some fase-shift pictures also. I found that for this particular issue I had to:
- press CH1 so that the CH1 menu appeared
- with that menu present, operate the Vertical position knob
- press CH2 so that the CH2 menu appeared
- with that menu present, operate the Vertical position knob
This allowed me to center the picture on the scope.
Same procedure goes for the Vertical Scale.
HTH,
Gerard
[edit] By the way, my firmware is the original 00.04.02 SP1 [/edit]