Tektronix TDS series scopes field calibration software plus other utilities

[volvo_nut_v70]

These are from the Tektronix forum:

The following files have been uploaded to the Files area of the TekScopes@groups.io group.

Description:
Field adjustment/Cal software for a whole slew of Tek TDS Series 'scopes.

https://groups.io/g/TekScopes/files/TEK%20TDS%20ALL.RAR

If not these might be of interest:

http://www.hakanh.com/dl/TDSErrLog.htm

http://www.hakanh.com/dl/TDS_pv.htm

If anyone has any other software that was available for these scopes (like 063-1134-00 Programming Exam Disk, etc etc) Or any Application Software Packages ( TDSPWR1, TDSJIT1V2, TDSCEM1, TDSCPM1 etc etc) Send them through to go up on Tekwiki!

Also, firmware too, I'm pulling all the firmware I come across out via GPIB to put up on TekWiki as well, it's really easy if you follow this guide:

https://www.eevblog.com/forum/repair/unified-tektool-released-!-(firmware-flash-tools-for-old-tds-series)/msg3758918/#msg3758918

[TERRA Operative]

Apologies for the thread bump, but here's a link to the 063-1134-00 V1.2 TDS Family Programming Examples Software disk:

https://w140.com/tekwiki/images/d/d7/063-1134-00_V1.2.zip