Author Topic: Dji mavic 3t quadcopter  (Read 1561 times)

0 Members and 1 Guest are viewing this topic.

Offline sERG777SXTopic starter

  • Newbie
  • Posts: 3
  • Country: ua
    • https://www.eevblog.com/forum/index.php?PHPSESSID=7jkmkkd5nn7kj8d5mtklr13tcs&
Dji mavic 3t quadcopter
« on: December 01, 2023, 06:18:02 am »
Hi everybody! Help me recognize the module from the Dji mavic 3t quadcopter. Is it possible to connect it to a computer or phone?

 

Offline sERG777SXTopic starter

  • Newbie
  • Posts: 3
  • Country: ua
    • https://www.eevblog.com/forum/index.php?PHPSESSID=7jkmkkd5nn7kj8d5mtklr13tcs&
Re: Dji mavic 3t quadcopter
« Reply #1 on: December 01, 2023, 07:33:33 am »
The interface board is also from Mavic, but I can’t find the datasheet for the RTS5830. And I don’t fully understand the logic of how these chips work. I would be very grateful for your help. Thank!
 

Offline ArsenioDev

  • Regular Contributor
  • *
  • Posts: 238
  • Country: us
    • DiscountMissiles: my portfolio and landing page
Re: Dji mavic 3t quadcopter
« Reply #2 on: December 01, 2023, 04:55:34 pm »
The interface board is also from Mavic, but I can’t find the datasheet for the RTS5830. And I don’t fully understand the logic of how these chips work. I would be very grateful for your help. Thank!

RTS5830 is a media converter to turn the parallel video out of the camera into a USB stream. if you have higher res images of the board and other images of the core I may be able to ident USB pins and the core
 
The following users thanked this post: sERG777SX

Offline sERG777SXTopic starter

  • Newbie
  • Posts: 3
  • Country: ua
    • https://www.eevblog.com/forum/index.php?PHPSESSID=7jkmkkd5nn7kj8d5mtklr13tcs&
Re: Dji mavic 3t quadcopter
« Reply #3 on: December 01, 2023, 11:10:51 pm »
 Thanks for the help! I still found the USB contacts, and the computer saw the device. But problem number two appeared. As I understand it, there are no driver files.
 Sorry for the photo quality, my iPhone was destroyed(
 The idea came to my mind to make a thermal imager from a downed Mavic, there’s no way you can help it) The bullet pierced the motherboard.
 Does this module have an analog video output? Maybe this will work out? I’ve just never worked with thermal imagers.
 Thank you)
« Last Edit: December 01, 2023, 11:17:48 pm by sERG777SX »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf