EEVblog Electronics Community Forum
A Free & Open Forum For Electronics Enthusiasts & Professionals
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Google
Bing
Home
Help
Search
About us
Links
Login
Register
EEVblog Electronics Community Forum
»
Products
»
Thermal Imaging
»
Flir scout tk firmware
« previous
next »
Print
Search
Pages: [
1
]
Go Down
Author
Topic: Flir scout tk firmware (Read 2010 times)
0 Members and 1 Guest are viewing this topic.
Bens4445
Newbie
Posts: 2
Country:
Flir scout tk firmware
«
on:
April 17, 2020, 07:41:40 pm »
hi everyone. who can help? share image SPI flash for flir scout tk.my device freezes on the splash screen and is not detected by the computer. please, help.
Logged
Fraser
Super Contributor
Posts: 13168
Country:
Re: Flir scout tk firmware
«
Reply #1 on:
April 17, 2020, 07:46:26 pm »
Dismantle it. Remove and reconnect the Lepton camera module flex cable. This may return the unit to operation.
Fraser
Logged
If I have helped you please consider a donation :
https://gofund.me/c86b0a2c
Bens4445
Newbie
Posts: 2
Country:
Re: Flir scout tk firmware
«
Reply #2 on:
April 17, 2020, 07:50:51 pm »
if it helped, I would not ask dump. my device is full brick
Logged
Fraser
Super Contributor
Posts: 13168
Country:
Re: Flir scout tk firmware
«
Reply #3 on:
April 18, 2020, 08:56:59 pm »
Logged
If I have helped you please consider a donation :
https://gofund.me/c86b0a2c
cherpann
Newbie
Posts: 1
Country:
Re: Flir scout tk firmware
«
Reply #4 on:
September 29, 2022, 08:21:54 pm »
Have somebody a Dump,please. camera , starts but freze on the start screen "flir v1.0.0" what can i do . thank you
Logged
Fraser
Super Contributor
Posts: 13168
Country:
Re: Flir scout tk firmware
«
Reply #5 on:
September 29, 2022, 10:32:34 pm »
I suggest you locate the engineering UART serial port on the main board and monitor it for the boot logging to see why the boot sequence halts. I cannot provide the location of the UART port but there will be one hiding on that PCB. You will need a USB to serial UART adapter that is available cheaply on eBay.
Fraser
Logged
If I have helped you please consider a donation :
https://gofund.me/c86b0a2c
Print
Search
Pages: [
1
]
Go Up
« previous
next »
Share me
Smf
EEVblog Electronics Community Forum
»
Products
»
Thermal Imaging
»
Flir scout tk firmware
There was an error while thanking
Thanking...
EEVblog Main Site
EEVblog on Youtube
EEVblog on Twitter
EEVblog on Facebook
EEVblog on Odysee