Hi All,
We are ready to release the DP-22 thermal camera now, below is the features, hope this camera will be some difference with other cameras,
1. Support -20°C ~ 330°C (14°F ~ 626°F), and can display to >600°C (1112°F)
2. Multi-mode view the image: Overlay fusion, Outline fusion, thermal, visible, Picture-in-Picture, please check the attached image: "image mode.jpg"
3. Image enhancement: High contrast, Legacy, Smooth. please check the attachment: "3 image enhancement.jpg"
4. Flexible Temperature Measurement: center point, hottest and coldest tracing, Zone measurement, Visible temperature measurement. And the zone area can be zoom in and out to avoid other temperature interference.
5. Temperature threshold alarm. The measured temperature is higher or lower than the threshold, it will show the alram on the display. please check the attachment "alarm.jpg"
6. WiFi. To transfer the images to PC or Android device without the cable.
7. Analysis software. Please check the attachment: "analysis software2.jpg"
And I recorded some videos on the Youtube, please check the below url, (There is one plastic cover on the display, so the camera image looks not so clear...)
https://www.youtube.com/playlist?list=PLRjWpFoOm2fG-W41OrRMF6BvwhZdyJOTqNow there are 2 colors of the cameras, gray and orange keyboard.
And we are find the partners worldwide to distribute the camera, if you are interested with that, please contact with me,
Email: adel@dianytech.com
Whatsapp & wechat: +86-18617032039