About EEVblog

Check Also

EEVblog #1334 – Mystery Dumpster Teardown

Mystery dumpster teardown time! With the most amazing mechanical mains power switch you’ll ever see! ...

10 comments

  1. If you want to make yourself a curved seamless background, without the problem of having to shoot all over the table length, just build yourself a little lift-up rack with a few wood sticks, and curve up the static mat up to about half the table length, from the wall. That way, you’ll be able to shoot from the free end, and still have your curved seamless background. Just don’t affix the anti-static mat to the table (it has to remain non-static, after all…)

  2. after your Outtatime logo, why not an Outtashelfspace or Outtabenchspace one? 🙂

  3. Maybe if you tidied the other ones up, you won’t need a New one 🙂

  4. Where are the high fives for the wife. She worked hard! Plus the best part of the video is at time 8:25. 🙂 Mom and her son!!!

  5. Regarding your lighting: I’m assuming you have some sort of softboxes for even lighting, and further assuming you’re using the handy floor stands most are supplied with. However, when you have a setup like your new bench, where the lighting is likely to be pretty standard, have you considered hanging them from the ceiling. This is often done in commercial studios to conserve floor space as well as set up a better angle from “on high.”

    Bob

  6. You might want to build a shelf under the bench. You already have the bracing on the long sides, double the available storage within the original footprint.

  7. Stefan van Rozendaal

    What a cute little helper you’ve got there! Proud dad! 🙂

  8. Great post. I was checking continuously this blog and I’m impressed!Extremely useful information particularly the last part 🙂 I care for such info much.I was looking for this certain information for a long time.Thank you and best of luck.

Leave a Reply

Your email address will not be published. Required fields are marked *