EEVblog #306 - Jim Williams Pulse Generator

[Scuba]

Hello,

Please sign me up with 1 calibrated kit and 1 non-calibrated kit. Thank you!

[nadona]

yes, one calibrated kit, please.

[Echo88]

One calibrated kit please 

[HackedFridgeMagnet]

Sagans going to be rich!

[Christe4nM]

  In that case I'd like to change my previous selection into "1 calibrated kit + 1 bare pcb"

[fmaimon]

I would like one of my boards calibrated. The other will be delivered as a kit, not assembled, right? How much would it cost to also include two BFGs for me?

[gibbled]

Please mark me down for one kit and one extra PCB.


Thanks,
James.

[Neganur]

both calibrated, cheers!

[AlfBaz]

Thank you very much for this...
I'll have 2 cal'd kits and 3 PCB's

I'm assuming info on how to pay you and where to send email and shipping addresses will be forthcoming?

[Teneyes]

Phew, just started reading this Forum, good education, 

Put me down for one calibrated kit please.   Paypal, USA

[free_electron]

Action will close Jan 19. I will order the PCB's then so we get them before chinese new year. There will be plenty of PCB's so if anyone wants a bare board later : no problem , they go in an envelope

I am at well over 50 kits now for EEvblog and CircuitsOnline combined (Circuitsonline is a dutch language forum about electronics i have been active on since ..i can't remember . Started when i was still living in belgium. must have been early 2005 or so. I hit 15000 posts there last year.. )

I found a bunch of the original 2n2369 made by SGS in the gold lead packages so not the cheapo motoroil version.

[marshallh]

I'm down for one kit, calibrated

[blackknife]

How much for a complete kit incl. shipping to italy?

[free_electron]

shipping internationally is always around 16$.
the kit price will come down as we are approaching a large volume now . i sold them in the past for 28$ but it is most likely going to be around 20$ now ...

this is a combined action running on another forum. the total count sits over 60 kits ... and i have not update what happened this week. its probably closer to 80 kits now ..

[enz]

I'm also down for one calibrated kit.

[G7PSK]

Another kit here please. Thank you. How will you let us know what your pay pal address is.

[BravoV]

Hope not too late for last minute change, 1 kit with calibrated option + 1 plain kit, this will be the host for the BFG, really, dunno why I missed it. 

[robrenz]

1 calibrated kit please.

[Noize]

1 calibrated kit please. UK Paypal

[sdscotto]

I PM'd two calibrated and one PCB a couple of days ago, but wanted to make sure just in case you don't check PM.

Thanks!

[free_electron]

I saw the pm. Don't worry. I'll post a summary list update tomorrow.

[cyr]

One calibrated kit for me as well please, assuming I'm not too late.

[free_electron]

This is the list as it is now. The action Closes tomorrow Jan 20 at 8PM Pacific time (California time)

Code: [Select]

                  Kit   : CAL  :  PCB
alfbaz                  :  2x  :  3x
andyturk                :  1x  :
Barryg41           1x   :      :
BravoV             1x   :  1x  :           with BFG
casinada           1x   :      :
Christe4nM         1x   :      :  1x
cyr                     :  1x  :
echo88             1x   :  1x  :
enz                     :  1x  :
EV                      :  2x  :
fmaimon            1x   :  1x  :
g7psk                   :  1x  :
giibbled           1x   :      :  1x
marhall_h               :  1x  :
nadona                  :  1x  :
Neganur                 :  2x  :
noize                   :  1x  :
olegjay            1x   :      :
[email protected]  1x   :      :
robrenz                 :  1x  :
sdscotto                :  2x  :  1x
Spelunker          1x   :      :
suba               1x   :  1x  :
teneyes                 :  1x  :
Tymm               2x   :      :
Wsalden            1x   :      :

------------------------------------
                  14x   : 21x  :  6x

I will do a bulk order of boards so there will be extra's. So don't despair if you missed the boat. there is wiggle room.(probably ill have 20 or so extra boards.)

You can still change your  mind on the CAL option for another 2 weeks ( it takes 10 working days to get the bare boards )

The Kit parts will be ordered Jan 28 So they arrive together with the boards. So also there you have some time.
I will post a preliminary price calculation in a moment, i need to collect the tally from the other forum as well.

Looks like Sagan's got at least 105 AU$ coming his way ...

[Christe4nM]

Hi free_electron, Could I have my kit w/ cal option please? Sagan would be happy

[free_electron]

will do.

Final pricing :

Code: [Select]

Kit (all parts , case , pcb)                : 22   US$
Calibration Option                          : 5    US$
Bare Board                                  : 2    US$

Shipping :
Inside US                                   : 5.35 US$ 
International Shipping                      : 17   US$
Bare Board ship (international): 4$

If you ordered multiple items : they fit together in 1 box ( up to 3 pounds ... these things are light enoug it all fits. )
Payment through Paypal directly form your bankaccount or debet card. I already took into account the small transaction fee PP charges. If you pay with CREDIT card through paypal you need to add 2$ ..

Example : 1 kit + 1 cal kit + 1 bare board , international shipping

[22 U$(kit)] + [22 us$(kit) + 5US$(cal)] + [2 US$] + [17 US$]  = 68 US$

I will declare actual value to customs. ( USPS insures the package for the declared value. So if it gets lost at least i don't lose the money.)  Prce is low enough that there should be no local import duty ... If there is : It's your responsability

Does anyone know the ITAR code for such things ? It is easier if it fits under a known ITAR code.