FS: Rohde & Schwarz CMU200 tested parts and modules

• FS: Rohde & Schwarz CMU200 tested parts and modules
  Posted by RF_fanatic on 06 Jan, 2022 21:14
• After years of repairing multiple Rohde & Schwarz CMU 200 units I have decided to stop doing this I am cleaning up my shack of working and tested parts and spareparts.
  
  Units are all tested in a reference test CMU200 unit in order to check and are working including the signal path, meaning if you would use the parts or modules as replacement of a defective part or unit than yours will be working again.
  
  Please contact me if you need one or more, or even the complete bulk, I will ship within europe.
  
  If also have some defective parts, clearly indicated in below listing:
  
  Tested OK:
  * Digital modules (some with and some without U65 option) all without 1100.2500 module allthough I do have some 1100.2500 if you want with bad audio respons)
  * Displays
  * PCMCIA card
  * FMR6 processor units
  * FMR5 processor unit
  * Fronts of CMU200 in perfect condition
  * Power supplies
  * Hard disks with reference image
  * B41 audio module
  * B12 > stable clock
  * Reference board
  * MCX cables
  * internal Power supply cables
  * internal ethernet cables
  * B21 signaling units
  * B52, B54,B56, B68,B66 units (in various configurations)
  
  And defective:
  * Power supplies
  * 1100.2500.02 modules (audio response not correct)
  * 1100.2130.03 modules (very bad signal respons)
  * 1100.3220.02 modules
• #1 Reply
  Posted by RF_fanatic on 06 Jan, 2022 21:39
• For some reason it seems I cant upload files.. second try :

  ---

  

  

  

  

  

  

  

  

  

  
• #2 Reply
  Posted by RF_fanatic on 06 Jan, 2022 21:40
• some more

  ---

  

  

  

  
• #3 Reply
  Posted by bdunham7 on 06 Jan, 2022 22:29
• I might be interested in the B41 module, and I'm curious about the B12 module--how much more stable is it compared to B11?
• #4 Reply
  Posted by RF_fanatic on 07 Jan, 2022 21:46
• Quote from: bdunham7 on 06 Jan, 2022 22:29

  I might be interested in the B41 module, and I'm curious about the B12 module--how much more stable is it compared to B11?
  

  sorry shipment only within europe as mentioned in first post
• #5 Reply
  Posted by Djil on 08 Jan, 2022 10:58
• Hello,
  
  Best wishes for health and happiness!
  
  What is the expected price for this type of item: Hard disks with reference image.
  
  Best regards
  Djil
  (France)
• #6 Reply
  Posted by RF_fanatic on 16 Jan, 2022 19:13
• Quote from: Djil on 08 Jan, 2022 10:58

  Hello,
  
  Best wishes for health and happiness!
  
  What is the expected price for this type of item: Hard disks with reference image.
  
  Best regards
  Djil
  (France)
  

  
  45 euro including the support plate and cable
• #7 Reply
  Posted by esoteq on 26 Jan, 2022 07:46
• Hi,
  does the reference image work with any modules installed ?
• #8 Reply
  Posted by michaculix on 24 Feb, 2022 08:26
• Hi, I'd be interested in an FMR6, sent you a pm.
• #9 Reply
  Posted by vaualbus on 07 Aug, 2022 10:58
• I send you a PM,
  best regards
• #10 Reply
  Posted by Bravo on 26 Aug, 2022 12:58
• Hi,
  Do you still have the front panel rubber buttons? If so, how much are they ?
  I presume this is what is worn when the bottom row buttons under the screen need a really hard push to make them work ?
  Best regards,
• #11 Reply
  Posted by HFG on 24 Aug, 2023 20:21
• Hi,
  Send you PM.
  Best regards