FS: Toellner TOE 8952 Dual Programmable DC Bench Power Supply [EU]

[axismundi]

For sale Toellner TOE 8952 high-performance dual output DC bench power supply: 0-60V/0-7A/0-200W per channel, with RS 232 and GPIB connectivity (option 015). In good condition (small marks on the body - check pictures) and working perfectly. Fantastic build and superlative performance (to be expected from Toellner): https://www.toellner.de/datenblaetter/en_8951_52.pdf

Asking 600 EUR+shipping. Insured shipping to EU should cost around 40 EUR, for other destinations feel free to drop me a note. Bank transfer preferred, Paypal accepted (add 3.5% to cover Paypal fees).

The item will be carefully packed and tracking number will be provided. Shipping out of France FYI.

[Noy]

Are these the original knobs?

And it was a rack unit or? Because it does not have any feet? So no air circulation without feets?

[axismundi]

Knobs are original.

Indeed, rack unit. Feet can be easily added (good rubber feet can be purchased for 2-5 EUR), to be chosen depending on the intended use.

[axismundi]

Up

[axismundi]

Bump

[Noy]

Maybe to expensive...
DP832A is cheaper and looks like better Specs.

[Mr. Scram]

Maybe to expensive...
DP832A is cheaper and looks like better Specs.

Though the asking price may be a bit high, those two aren't quite comparable devices.

[axismundi]

Maybe to expensive...
DP832A is cheaper and looks like better Specs.

As a seller will not comment directly on the price, that is up to the potential buyers to decide. I will just say though that on fleebay these typically go for +1,000 EUR used. Will not mention/use as a reference the price when new cause one may fall from the chair.

You're probably not familiar with Toellner since comparing it with DP832A. As a hobbyist one can definitely be served well by a DP832A, but even so and just to set the record straight the model I am selling has double the power, double to output voltage and more than double the output current of 832A. That is before we go in other performance aspects.

[Noy]

I'm familar with toellner. I have some devices from them here and at work.

I know they are rock solid and pretty well build .
And first i tought about to pull the trigger on your offer. But currently i have enough "normal" power supplys.

I'm only missing one which i can programm for example i can adjust the slew rate (not only 2 options like your device offers) at switching on and other stuff. Your toellner with the arbitrary function would be an option. But unfortunally it doesn't have it.

And if you don't need the power of this device there are plenty of other options which are a bit more interestingly for the same price.

[paulbt]

Are these the original knobs?

And it was a rack unit or? Because it does not have any feet? So no air circulation without feets?

Hello!

FYI, those knobs are original, but it seems they are missing some caps. So maybe someone took out the front panel PCB for some reason. It should also have 4 standing feet, but I think this one was used in a rack unit and those feet were removed (...and lost).

Below is a photo of the same PSU from my workplace. I also have photos from the inside if someone is interested.

[zzattack]

Great unit and price. Shame my bench isn't another 2 inches deep..

[Mr. Scram]

Hello!

FYI, those knobs are original, but it seems they are missing some caps. So maybe someone took out the front panel PCB for some reason. It should also have 4 standing feet, but I think this one was used in a rack unit and those feet were removed (...and lost).

Below is a photo of the same PSU from my workplace. I also have photos from the inside if someone is interested.

It looks like the unit sold here took a hit to the front panel, considering there's a fold running across it. I can't really imagine a light knock causing that.

[paulbt]

Great unit and price. Shame my bench isn't another 2 inches deep..

I cannot miss a nice subtle joke..