Author Topic: WTB Audio analyser, Prism Dscope III, maybe AP, something in that line.  (Read 1696 times)

0 Members and 1 Guest are viewing this topic.

Offline dmillsTopic starter

  • Super Contributor
  • ***
  • Posts: 2093
  • Country: gb
Hi all,

For my home lab I am after an audio analyser, ideally both analog and digital capable.
I am thinking Prism Dscope III, or maybe some form of AP set, budget is a few thousand depending on options, anyone got anything they would be interested in selling?

Location is UK.

Regards, Dan.
 

Offline DaJMasta

  • Super Contributor
  • ***
  • Posts: 2455
  • Country: us
    • medpants.com
Re: WTB Audio analyser, Prism Dscope III, maybe AP, something in that line.
« Reply #1 on: October 29, 2019, 06:39:50 pm »
A few thousand is the right ballpark, in my experience, though an older AP or a R&S UPL or something would probably be a bit less - I don't know how easy it will be to find a dScope III or modern AP system (maybe an APx 51X) for that price, but if you look for long enough you may come across a good deal.


It's not exactly what you're looking for and it's not immediately available (needs some testing to be sure it's fully functional and it's a couple projects back in the queue), but I've got an R&S UPV with no options (so analog only, generator to 80kHz but analyzer to 250kHz) that I intended to sell in a couple months time that would save me a good chunk on fees if I didn't have to sell through ebay.
 

Offline macboy

  • Super Contributor
  • ***
  • Posts: 2396
  • Country: ca
Re: WTB Audio analyser, Prism Dscope III, maybe AP, something in that line.
« Reply #2 on: October 30, 2019, 06:06:50 pm »
I'll point out an alternative: a PC with a very high quality sound card plus software.
This can yield impressively good results, in part due to a large amount of memory and processing power available on modern PCs.

I use a M-Audio Audiophile 192. This has balanced outputs and differential inputs, and can measure THD+N below 0.0010%.
I also have a standalone traditional audio analyzer: Panasonic (National) VP-7722A, which is good to below 0.0001% (1 ppm) THD and 0.0003% THD+N.
 

Offline dmillsTopic starter

  • Super Contributor
  • ***
  • Posts: 2093
  • Country: gb
Re: WTB Audio analyser, Prism Dscope III, maybe AP, something in that line.
« Reply #3 on: October 30, 2019, 07:18:28 pm »
To pull off the soundcard approach you really need to add a set of notch and bandpass filters so you are only digitising the residuals. 
It can be done, but the nice thing about an AP (or equivalent) is that all that stuff is there and you tend not to be questioning your tools rather then your DUT.

Regards, Dan.
 

Offline cvanc

  • Frequent Contributor
  • **
  • Posts: 679
  • Country: us
Re: WTB Audio analyser, Prism Dscope III, maybe AP, something in that line.
« Reply #4 on: October 31, 2019, 01:35:07 am »
If you can live with analog only you might want to consider the Quantasylum QA401.  I have one and while it's never gonna be confused with an Audio Precision it's a remarkable device - and tiny, too.

https://quantasylum.com/products/qa401-audio-analyzer

 

Offline bozidarms

  • Regular Contributor
  • *
  • Posts: 183
  • Country: at
Re: WTB Audio analyser, Prism Dscope III, maybe AP, something in that line.
« Reply #5 on: October 31, 2019, 05:53:30 am »
RTX6001 Audio-analyzer!
Best regards / Mit freundlichen Grüßen / 敬具 / 此致敬礼
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf