Author Topic: PCB/EDA software list  (Read 154791 times)

0 Members and 6 Guests are viewing this topic.

Offline tautech

  • Super Contributor
  • ***
  • Posts: 16333
  • Country: nz
  • Taupaki Technologies Ltd. NZ Siglent Distributor
    • Taupaki Technologies Ltd.
Re: PCB/EDA software list
« Reply #100 on: August 01, 2016, 03:10:53 am »
Great to see this list: bookmarked and thanked.

Neat to think you are still here and updating this since 2011.  :-+
Avid Rabid Hobbyist
 

Offline technotronix

  • Regular Contributor
  • *
  • Posts: 211
  • Country: us
    • PCB Assembly
Re: PCB/EDA software list
« Reply #101 on: August 12, 2016, 06:43:26 am »
Great Listing.

This is really helpful. You saved my time.

Thanks.
 

Offline Jeffw5555

  • Contributor
  • Posts: 5
  • Country: us
Re: PCB/EDA software list
« Reply #102 on: September 21, 2016, 01:44:09 am »
I started my career laying out PCB's in the early 80's, a number of my boards are still flying today in several military aircraft, cant say which because I was under clearance at the time.  Anyway, I started a company about 6 years ago and we sell equipment into a niche application, not a huge business, but keeps me busy.  At that time, I did a survey of most of the cheaper layout applications at the time, and finally settled on Sprint-Layout 6.0.  It doesn't have many bells or whistles, and it is totally manual, doesn't have autorouting, but does have clearance checking functionality.  I believe it is the most powerful application versus price out there.  (best value)  I am still blown away by the fact that I can create a board in a few hours, email the gerbers overseas, and have prototype boards at my door in a few days at a cheap cost.

One of the limitations of Sprint Layout is its libraries, I have needed to tweak a number of them and create a bunch of my own.  I was on the team that created the original IPC surface mount guidelines in the early 80's, so this is no big deal....

Since I am old school, I naturally comment that none of the programs I have seen can really assist a designer to create the optimum board construction, either in optimal routing, RF performance, design for optimal cost.   
 

Offline kasbah

  • Contributor
  • Posts: 36
  • Country: gb
    • My electronics project sharing site, kitnic.it
Re: PCB/EDA software list
« Reply #103 on: October 30, 2016, 03:13:27 pm »
There is a new online Gerber viewer at http://viewer.tracespace.io.

It lets you inspect the layers as well as a preview rendering of the board.

Share your designs on kitspace.org
 
The following users thanked this post: deephaven, xzswq21

Offline Inflex

  • Regular Contributor
  • *
  • Posts: 125
  • Country: au
    • Charters Towers Phone & Computer Repairs
Re: PCB/EDA software list
« Reply #104 on: December 31, 2016, 04:49:58 am »
Not exactly sure where to place this, as it's more of a /repair-rework/ end software tool, but I'd like to suggest adding OpenBoardView to the list of software.  As the name implies, it's OpenSource (MIT licence) and it's for rendering boardview files.  If you've watched any recent Louis Rossmann videos you'll have seen it being used.

http://openboardview.org

Apologies if not appropriate for this section.
Magicsmoke abuser | What I repair daily on YouTube | FlexBV
- BoardView
| Paul Daniels
 

Offline scopeman

  • Regular Contributor
  • *
  • Posts: 160
Re: PCB/EDA software list
« Reply #105 on: January 31, 2017, 01:51:51 am »
How about Robot Room's Copper Connection?

It can read ExpressPCB files and can create Gerbers from them as well as create PCB's from scratch.

They have a Home Edition (free but no Gerber or Excelon), A Studio Edition for 49.00 with Gerber and Excelon , and an Ultimate Edition for 99.00, that outputs in open text format.

It looks like the Home Edition can print out direct to a laser for transfer printing with mirroring capability or direct to paper scaled 1:1 for positive/negative use.

Limited to two layers AFAIK but seems quite easy to use. I found the program when looking for a way to convert a design that I found on-line done in ExpressPCB to Gerbers

so I could import them into SprintLayout6.0 and edit the PCB.

See:

http://www.robotroom.com/CopperConnection/index.html



Sam



 

Offline AE2RO

  • Newbie
  • Posts: 2
  • Country: no
Re: PCB/EDA software list
« Reply #106 on: February 05, 2017, 01:32:05 pm »
Have anyone tried the free Orcad Lite version?
I have just stumbled across it and would like to know if it is any good.

http://www.orcad.com/products/orcad-lite-overview
 

Offline hammy

  • Supporter
  • ****
  • Posts: 435
  • Country: 00
Re: PCB/EDA software list
« Reply #107 on: February 05, 2017, 05:56:35 pm »
Please add:
PollEx from Polliwog http://www.polliwogeda.com
And from Daves video:
WinPCB https://www.csieda.co.jp/en/csieda/winPCB.html
 

Offline bitwelder

  • Frequent Contributor
  • **
  • Posts: 823
  • Country: fi
Re: PCB/EDA software list
« Reply #108 on: February 05, 2017, 08:33:33 pm »
Have anyone tried the free Orcad Lite version?
I have just stumbled across it and would like to know if it is any good.

http://www.orcad.com/products/orcad-lite-overview

It feels funny how much they stress that their usage license does not expire:
Quote
Unlike other free or trial versions of CAD software, access to OrCAD Lite does not expire. You can continue to use the lite version for as long as you want even after you upgrade to the full OrCAD suite.
I wonder whether the web page has always been like that, or whether they have updated after a certain CAD package has changed its licensing scheme  :P
 

Offline Robaroni

  • Frequent Contributor
  • **
  • Posts: 352
  • Country: us
  • Retired EE
    • Design Specialties
Re: PCB/EDA software list
« Reply #109 on: February 06, 2017, 12:15:35 am »
I think we have to differentiate here, two groups, EDA for professionals or hobbyists.
 

Offline TheUnnamedNewbie

  • Frequent Contributor
  • **
  • Posts: 835
  • Country: 00
Re: PCB/EDA software list
« Reply #110 on: September 21, 2017, 11:04:15 am »
Keysight's ADS is used for PCB layout aswell. I myself have used it a lot for RF microstrip filters (And other filters). Perhaps worth adding to the list?
The best part about magic is when it stops being magic and becomes science instead
 

Offline Deridex

  • Regular Contributor
  • *
  • Posts: 162
  • Country: de
  • IMHO
Re: PCB/EDA software list
« Reply #111 on: March 26, 2018, 05:06:58 pm »
You might want to take a look at Horizon:
https://github.com/carrotIndustries/horizon
I think it can become a decent EDA software.
 

Offline DrAlx

  • Newbie
  • Posts: 2
  • Country: gb
Re: PCB/EDA software list
« Reply #112 on: April 26, 2018, 05:04:01 pm »
Please consider adding VeroRoute to your list of programs for stripboard/perfboard.
   http://sourceforge.net/projects/veroroute/
It's written by me.  The larger the user base, the quicker it will improve.
 

Offline PointyOintment

  • Frequent Contributor
  • **
  • Posts: 326
  • Country: ca
  • ↑ I scanned my face
Re: PCB/EDA software list
« Reply #113 on: October 11, 2018, 07:26:22 am »
I clicked on the link for Copper Connection, because I hadn't checked on it in a while, and it looks like it now belongs to ExpressPCB: https://www.expresspcb.com/CopperConnection/

They say they'll have it updated to work with ExpressPCB manufacturing within 60 days, but there's no start date on the page that I could find. All Copper Connection customers can get a free lifetime ExpressPCB Engineer Membership, which gets you 10% off some stuff and "free Gerber files". They also say that the current Copper Connection will continue to work, and apparently they'll even provide replacement keys for the current version in case you lose yours.



Horizon looks interesting. The user experience looks like it's better than KiCad, which is enough for me to hopefully never try KiCad a second time. It tries to do things "the right way", some of which I like and some of which I'm not sure about. A couple of examples: 1. It's netlist-aware in editing, which sounds nice because I like netlists for reverse engineering. But it doesn't consider identically named netlists connected, which sounds like it could make netlist-based RE more difficult. 2. Apparently it doesn't allow you to use generic parts that aren't associated with an actual part number, which seems like it would make going from ideas to schematics very inconvenient because it sounds like you'd have to stop your schematic drawing workflow to look up and decide on every single part before you can draw it. Anyway, maybe I'll try it.

Offline unitedatoms

  • Regular Contributor
  • *
  • Posts: 181
  • Country: us
  • Uniting atoms one at a time
    • Unitedatoms
Re: PCB/EDA software list
« Reply #114 on: December 15, 2018, 12:11:29 am »
LibrePCB of librepcb.org released this December. May be it will turn into popular free EDA tool.
Open Hardware DIY Kit LCR/ESR Impedance meter UA315
 
The following users thanked this post: hammy

Offline Sergey Astakhov

  • Newbie
  • Posts: 1
  • Country: ru
Re: PCB/EDA software list
« Reply #115 on: July 15, 2019, 11:24:48 am »
Upverter (https://upverter.com/) in 2017 joint Altium and became free for all types of projects, so it can be moved from "Commercial" section to "Free".
 

Offline nigelwright7557

  • Regular Contributor
  • *
  • Posts: 137
  • Country: gb
    • Murton-Pike Systems
Re: PCB/EDA software list
« Reply #116 on: July 24, 2019, 03:14:49 am »
Don't forget PCBCAD51 and PCBCAD360.
Just a few pounds at https://www.murtonpikesystems.co.uk
PCBCAD51 PCB design software https://www.murtonpikesystems.co.uk
 

Offline hammy

  • Supporter
  • ****
  • Posts: 435
  • Country: 00
Re: PCB/EDA software list
« Reply #117 on: July 24, 2019, 09:49:02 am »
Don't forget PCBCAD51 and PCBCAD360.
Just a few pounds at https://www.murtonpikesystems.co.uk

What are the differences between PCBCAD51 and PCBCAD360?
 

Offline nigelwright7557

  • Regular Contributor
  • *
  • Posts: 137
  • Country: gb
    • Murton-Pike Systems
Re: PCB/EDA software list
« Reply #118 on: July 28, 2019, 09:51:43 pm »
Don't forget PCBCAD51 and PCBCAD360.
Just a few pounds at https://www.murtonpikesystems.co.uk

What are the differences between PCBCAD51 and PCBCAD360?

PCBCAD51 was written in C# and PCBCAD360 was written in C++.
PCBCAD360 is quite a bit faster on screen redraws.
PCBCAD51 has some basic 3d rendering of pcb's, PCBCAD360 doesnt.
Otherwise they are identical.
PCBCAD51 PCB design software https://www.murtonpikesystems.co.uk
 
The following users thanked this post: hammy


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf