Author Topic: Graphical Calculators running basic  (Read 855 times)

0 Members and 1 Guest are viewing this topic.

Offline simon christoTopic starter

  • Regular Contributor
  • *
  • Posts: 69
  • Country: au
Graphical Calculators running basic
« on: May 03, 2024, 12:18:29 am »
Hi there!!
What's the story, on Grahical Calcultors.Im thinking on purchasing one, and I'm not sure, which one to buy??
Tah, Simon.
 

Offline djsb

  • Frequent Contributor
  • **
  • Posts: 957
  • Country: gb
Re: Graphical Calculators running basic
« Reply #1 on: May 03, 2024, 05:13:41 am »
I'm not sure if the latest calculators are going to run BASIC. TI has many OLDER calculators (such as the TI89 PLATINUM etc) that run TIBASIC. The latest TI NSPIRE CX CAS runs python. Not sure about other brands.
David
Hertfordshire, UK
University Electronics Technician, London, PIC16/18, CCS PCM C, Arduino UNO, NANO,ESP32, KiCad V8+, Altium Designer 21.4.1, Alibre Design Expert 28 & FreeCAD beginner. LPKF S103,S62 PCB router Operator, Electronics instructor. Credited KiCad French to English translator
 

Offline simon christoTopic starter

  • Regular Contributor
  • *
  • Posts: 69
  • Country: au
Re: Graphical Calculators running basic
« Reply #2 on: May 03, 2024, 02:35:04 pm »
Thanks, for your reply,
Simon.
 

Online RAPo

  • Frequent Contributor
  • **
  • Posts: 788
  • Country: nl
Re: Graphical Calculators running basic
« Reply #3 on: May 03, 2024, 03:56:23 pm »
The HP-prime has TI-basic

https://youtu.be/FJwkoDKlh8Q
 

Offline simon christoTopic starter

  • Regular Contributor
  • *
  • Posts: 69
  • Country: au
Re: Graphical Calculators running basic
« Reply #4 on: May 04, 2024, 05:50:02 am »
Ill, check it out,
Thanks Simon.
 

Offline DiTBho

  • Super Contributor
  • ***
  • Posts: 4230
  • Country: gb
Re: Graphical Calculators running basic
« Reply #5 on: May 04, 2024, 12:10:08 pm »
GW-BASIC like? -> SHARP PC-E500
The opposite of courage is not cowardice, it is conformity. Even a dead fish can go with the flow
 
The following users thanked this post: RAPo

Offline simon christoTopic starter

  • Regular Contributor
  • *
  • Posts: 69
  • Country: au
Re: Graphical Calculators running basic
« Reply #6 on: May 05, 2024, 03:21:18 am »
I had a post, a while ago, on USB C connectors not locking in.Some people would have seen it.
Anyway, I found so much dirt and grime in the socket - on the Mobile, that it desperatly needed
a clean-out.After, loosining the dirt, and using Compressed Air (drained from containing Water),
it locks in fine!!
Probally, using a Old Medium Toothbrush, to 'prod' the dirt out, wouldn't go astray.

Tah, Simon.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf