but I'm getting the dreaded fe error on the3.40 firmwares you posted. not sure whats going on there..
don't worry, the DSO you ("P" model) have is complettly new design. There is no other firmware version than 3.x for your DSO.
Other models (like "B" and "MSO", "BM/BMV" not yet confirmed but probably the same problem) have multiple hardware
revisions:
- hw0, hw1005, hw1007 with Samsung S3C2440 SoC - with firmware 2.x
- hw??? with Samsung S3C2416 SoC - with firmware 3.x
For both, ppl with 2.x or/and 3.x firmware installed, when then install different firmware the DSO/MSO will get bricked.
So they have to watch out what they installing. For you as already said, didn't matter, your DSO is new, based on
S3C2416 and there only existing firmware is already 3.x. You can't install 2.x because there was never 2.x for your DSO,
you can't install firmware from other models because they using different naming cnvention for update files and different
firmware encryption pwd.