Electronics

No New Posts Beginners rss

A place for electronics newbies to ask questions. Include detail & what you have already done to find the answer.

401812 Posts
35011 Topics

Last post by kanaron
in Re: Lifting and tilting ...
on Today at 09:45:03 am

No New Posts Projects, Designs, and Technical Stuff rss

Show off your projects you are working on. Talk about designs or ideas, ask technical questions, and share technical information.

402897 Posts
33940 Topics

Last post by magic
in Re: How to make a one-tr...
on Today at 09:52:19 am

No New Posts Repair rss

Ask for repair help or describe how to repair equipment

184097 Posts
18975 Topics

Last post by tatel
in Re: screws, bolts and fa...
on Today at 09:39:35 am

No New Posts Microcontrollers rss

Microcontroller hardware or software. Use the Embedded Computer section for single board computers like RPi etc

150318 Posts
9470 Topics

Last post by Sudo_apt-get_install_yum
in Re: [PIC18F2523] ADC ISR...
on Today at 08:31:12 am

No New Posts FPGA rss

Everything programmable logic related. FPGA's, PLD's, VHDL, Verilog etc

22990 Posts
1355 Topics

Last post by KreAture
in Re: SD card/SDIO 3.0 lev...
on Today at 09:04:00 am

No New Posts RF, Microwave, Ham Radio rss

RF, Microwave, and Ham Radio designs, projects, and discussions.

48457 Posts
4226 Topics

Last post by A.Z.
in Re: Build a loop antenna...
on Today at 07:36:32 am

No New Posts Metrology rss

Everything metrology & Calibration related. This is where the Voltnuts hang out.

67896 Posts
2827 Topics

Last post by Johnny B Good
in Re: I bought the very La...
on Today at 12:29:11 am

No New Posts Power/Renewable Energy/EV's rss

Power related discussions, Renewable Energy, energy storage, Electric Vehicles etc.

30905 Posts
1919 Topics

Last post by IanJ
in Re: Smart Meter Installe...
on Today at 09:49:05 am

No New Posts Open Source Hardware rss

A community section to discuss Open Source Hardware (OSHW) projects or anything OSHW related.

5885 Posts
406 Topics

Last post by schmitt trigger
in Re: Designing an Opensou...
on September 21, 2024, 03:08:39 pm

No New Posts Manufacturing & Assembly rss

Discuss PCB or product manufacture or assembly. Home brew PCB's, Pick & Place machines, soldering, reflow etc

39057 Posts
2964 Topics

Last post by SMTech
in Re: Which soldermask col...
on Today at 09:16:51 am

No New Posts Mechanical & Automation Engineering rss

Machining, Fabrication, Robotics, CNC and other automation.

5136 Posts
403 Topics

Last post by Phil1977
in Re: strongest material w...
on Today at 09:16:05 am

No New Posts PCB/EDA/CAD rss

General discussion on Electronics Design PCB, CAD and EDA software.

49165 Posts
5209 Topics

Last post by Bryn
in Re: Component Links Dont...
on Today at 07:24:30 am

Child Boards: KiCad, Altium Designer, DIPtrace, Circuit Studio, Eagle, Proteus

Products

No New Posts Test Equipment rss

Test Equipment reviews, teardowns, discussion etc. This is the biggest T&M forum on the interwebs! Use Search to find products.

615574 Posts
23074 Topics

Last post by Elextro
in Re: Rigol DHO914S high t...
on Today at 09:38:18 am

No New Posts Thermal Imaging rss

Everything to do with thermal imaging and cameras

43416 Posts
2061 Topics

Last post by gamerpaddy
in Re: Using Xtherm/Infiray...
on Today at 02:39:56 am

No New Posts Other Equipment & Products rss

Product reviews, teardowns, and discussion about any gear that's NOT test equipment related. Tools, gadgets etc.

82146 Posts
5861 Topics

Last post by MarkMLl
in Re: Brother (possibly al...
on Today at 09:34:15 am

No New Posts Crowd Funded Projects rss

The best place on the web to discuss crowd funded hardware projects! Promotions allowed, just be ready for serious expert feedback.

20748 Posts
1010 Topics

Last post by mairo
in Re: "SourcePure-SC" port...
on September 11, 2024, 04:35:28 am

No New Posts 3D printing rss

All about 3D printing

3675 Posts
141 Topics

Last post by MarkF
in Re: Resize a STL File Fo...
on September 22, 2024, 05:38:20 pm

No New Posts Dodgy Technology rss

Discuss all dodgy sounding products, technology, and marketing here. Snake oil, Audiophoolery, Free Energy, outright scams, or just marketing-wank products that don't have a chance of meeting their specs, this is the place to discuss and debunk them.

21609 Posts
866 Topics

Last post by RJSV
in Re: Leaf Cutter ANTS app...
on Yesterday at 10:26:13 pm

No New Posts Computers rss

PC's, Macs, Tablets, phone thingoes etc

60606 Posts
3295 Topics

Last post by Nominal Animal
in Re: Abandoned - Very fru...
on Today at 07:59:50 am

Child Boards: Embedded Computing, Vintage Computing, Programming, Networking & Wireless, Security, ChatGPT/AI

General

No New Posts General Technical Chat rss

This is where everyone hangs out and rants and chats about whatever electronics topics that don't quite fit into the other more specific categories on this forum. Occasional off-topic stuff is ok, but generally we like to keep it electronics related, so please don't start deliberately off-topic threads.

488276 Posts
23669 Topics

Last post by Siwastaja
in Re: Morphy Richards Duct...
on Today at 09:05:56 am

Child Boards: TEA, Cooking
No New Posts Jobs rss

An industry jobs board. Post your job ad here. Commercial companies are welcome provided they don't spam and run, you must stick around & contribute. No HR droids or recruitment companies.

2660 Posts
490 Topics

Last post by dumtux
in Re: help wanted completi...
on September 23, 2024, 05:50:59 am

No New Posts Work Wanted rss

Looking for contract or regular work? Post your work wanted ad here listing your skills and what you have to offer. Resumes attachments (PDF) are allowed if you want to make them public. Companies NOT allowed.

768 Posts
204 Topics

Last post by electronx
in Re: Hardware Design Engi...
on Today at 09:06:07 am

No New Posts Buy/Sell/Wanted rss

List your electronics related stuff for sale, or link to others. Wanted ads go here too. Only dealers who are valued contributors to the forum community are welcome to post commercially.

66239 Posts
11814 Topics

Last post by tggzzz
in Re: Lots of test equipme...
on Today at 09:32:47 am

No New Posts Contests & Events rss

All time sensitive things like contests, events, seminars, webinars, meetups, exhibitions, promotions, courses, etc.

12445 Posts
306 Topics

Last post by mikeselectricstuff
in Electronica 2024, Munich
on August 29, 2024, 10:40:13 pm

EEVblog

No New Posts Supporters Lounge rss

A private board for supporters of and major contributors to the blog. CLICK HERE to subscribe.

12580 Posts
374 Topics

Last post by Protected
in Protected
on Today at 04:51:59 am

No New Posts EEVblog Specific rss

Chat relating to specific EEVblog episodes or content.

101986 Posts
2632 Topics

Last post by floobydust
in Re: EEVblog 1640-Mailbag...
on Today at 02:54:40 am

No New Posts Other Blogs rss

Got your own blog/youtube channel? Want to post someone else's contentand talk about it? You can do that here.

5778 Posts
1020 Topics

Last post by thm_w
in Rosenberg PCB design ser...
on September 13, 2024, 08:26:06 pm

No New Posts The AmpHour Radio Show rss

Talk about the Dave Jones & Chris Gammell electronics podcast show.

3416 Posts
294 Topics

Last post by oPossum
in Re: Chris live streaming...
on Today at 12:35:02 am

No New Posts News/Suggestions/Help rss

News about the blog or the forum, video suggestions, and help on using the forum

12507 Posts
1184 Topics

Last post by thm_w
in Re: jlcpcb
on September 09, 2024, 08:09:08 pm

  • No New Posts
  • Redirect Board

EEVblog Electronics Community Forum - Info Center

Recent Posts Recent Posts

Topic: Poster: Board: Post Time:
Re: How to make a one-transistor bjt 2KHz amplifer work over 3.3 to 4.2 V Vout=1-V magic Projects, Designs, and Technical Stuff Today at 09:52:19 am
Re: Smart Meter Installed IanJ Power/Renewable Energy/EV's Today at 09:49:05 am
Re: Lifting and tilting 0402 SMD LEDs by solder paste while soldering kanaron Beginners Today at 09:45:03 am
Re: screws, bolts and fasteners used on vintage TE tatel Repair Today at 09:39:35 am
Re: Rigol DHO914S high temperature / overheating probe inputs Elextro Test Equipment Today at 09:38:18 am
Re: Magnova oscilloscope Sorama Test Equipment Today at 09:36:16 am
Re: Brother (possibly also some Bernina) embroidery machine memory cards MarkMLl Other Equipment & Products Today at 09:34:15 am
Re: Lots of test equipment for sale on UK auction tggzzz Buy/Sell/Wanted Today at 09:32:47 am
Re: Recommendation Request - Neg to Pos regulator Zero999 Projects, Designs, and Technical Stuff Today at 09:29:54 am
Re: Rigol MSO5074 Logic Analyzer issues tggzzz Test Equipment Today at 09:25:02 am
Re: has anyone tried to make a vacuum tube in space? Phil1977 Projects, Designs, and Technical Stuff Today at 09:24:30 am
Re: Fixture to safely measure mains AC amperage 5U4GB Test Equipment Today at 09:20:19 am
Re: Snubber circuit for MOSFET with inductive load PGPG Beginners Today at 09:19:28 am
Re: Metcal PS-900 Soldering station heats up to over 400 °C Everbrave Repair Today at 09:18:52 am
Re: has anyone tried to make a vacuum tube in space? tszaboo Projects, Designs, and Technical Stuff Today at 09:17:03 am
Re: Which soldermask colour has best component visibility SMTech Manufacturing & Assembly Today at 09:16:51 am
Re: LCR Tweezer Fnirsi ST1 vs. Zoyi MD1 Paul T Test Equipment Today at 09:16:09 am
Re: strongest material with low thermal conductivity? Phil1977 Mechanical & Automation Engineering Today at 09:16:05 am
Re: Smart Meter Installed tszaboo Power/Renewable Energy/EV's Today at 09:12:44 am
Re: strongest material with low thermal conductivity? coppercone2 Mechanical & Automation Engineering Today at 09:11:31 am
Re: Lifting and tilting 0402 SMD LEDs by solder paste while soldering Jeroen3 Beginners Today at 09:10:02 am
Re: strongest material with low thermal conductivity? brucehoult Mechanical & Automation Engineering Today at 09:08:45 am
Re: How to make a one-transistor bjt 2KHz amplifer work over 3.3 to 4.2 V Vout=1-V moffy Projects, Designs, and Technical Stuff Today at 09:06:37 am
Re: Hardware Design Engineer Looking For a Job electronx Work Wanted Today at 09:06:07 am
Re: Morphy Richards Ductless Portable Air Conditioner funded by Kickstarter! Siwastaja General Technical Chat Today at 09:05:56 am
Re: Test Equipment Anonymous (TEA) group therapy thread onsokumaru Test Equipment Today at 09:04:40 am
Re: SD card/SDIO 3.0 level translation solution KreAture FPGA Today at 09:04:00 am
Re: Lifting and tilting 0402 SMD LEDs by solder paste while soldering kanaron Beginners Today at 08:58:56 am
Re: Test Equipment Anonymous (TEA) group therapy thread squadchannel Test Equipment Today at 08:58:25 am
Re: Test Equipment Anonymous (TEA) group therapy thread onsokumaru Test Equipment Today at 08:56:49 am
Re: Smart Meter Installed nali Power/Renewable Energy/EV's Today at 08:50:14 am
Re: Rigol DHO914S high temperature / overheating probe inputs Fungus Test Equipment Today at 08:49:51 am
Re: How to properly compensate a composite OP that aims for high open loop gain? Kleinstein Beginners Today at 08:49:25 am
Re: Viotech NB32C Monitor repair Vaionko Repair Today at 08:47:11 am
Re: Test Equipment Anonymous (TEA) group therapy thread wkb Test Equipment Today at 08:45:49 am
Re: SDS800X HD Wanted Features 2N3055 Test Equipment Today at 08:44:24 am
Simcom module selection Martin Opresnik Projects, Designs, and Technical Stuff Today at 08:43:51 am
Re: Magnova oscilloscope jusaca Test Equipment Today at 08:41:24 am
Re: Debugging a new Sigrok Pulseview Protocol Decoder -- where is the error log? AndySymons Projects, Designs, and Technical Stuff Today at 08:36:37 am
Re: has anyone tried to make a vacuum tube in space? Andy Chee Projects, Designs, and Technical Stuff Today at 08:35:46 am
Re: SDS800X HD Bug Reports + Firmware jasonquin Test Equipment Today at 08:34:41 am
Re: [PIC18F2523] ADC ISR being called when ADIE is not set? Sudo_apt-get_install_yum Microcontrollers Today at 08:31:12 am
Re: How to make a one-transistor bjt 2KHz amplifer work over 3.3 to 4.2 V Vout=1-V PCB.Wiz Projects, Designs, and Technical Stuff Today at 08:29:44 am
Re: Lifting and tilting 0402 SMD LEDs by solder paste while soldering tooki Beginners Today at 08:26:43 am
strongest material with low thermal conductivity? coppercone2 Mechanical & Automation Engineering Today at 08:25:09 am
[PIC18F2523] ADC ISR being called when ADIE is not set? Sudo_apt-get_install_yum Microcontrollers Today at 08:23:15 am
Re: has anyone tried to make a vacuum tube in space? Jeroen3 Projects, Designs, and Technical Stuff Today at 08:22:28 am
Re: LCR Tweezer Fnirsi ST1 vs. Zoyi MD1 TheDefpom Test Equipment Today at 08:17:12 am
Re: Lifting and tilting 0402 SMD LEDs by solder paste while soldering RogerThat Beginners Today at 08:16:56 am
Re: Magnova oscilloscope Andre77 Test Equipment Today at 08:16:46 am

Forum Stats Forum Stats

2963157 Posts in 195020 Topics by 66376 Members. Latest Member: efectoscluster
Latest Post: "Re: How to make a one-tr..." ( Today at 09:52:19 am )
View the most recent posts on the forum.
[More Stats]

Users Online Users Online

4106 Guests, 214 Users

Users active in past 60 minutes:
807, maher8, jas, magic, SMTech, squadchannel, BinaryBits, harha, Antonio90, pwsonw90, multipla, LazyJack, mfro, neillnz, Phil1977, Elextro, coromonadalix, Jeroen3, sera_os, Original, PA0PBZ, asp, kfm, hanakp, bsdphk, vdetal, Kilo Tango, csuhi17, Hawaka, Siwastaja, IanJ, odemiriz, krish2487, matb, jessy, Nominal Animal, boreack, Zero999, ADT123, Wolfgang, Audiorepair, Slh, Fraser, onsokumaru, khach, ch_scr, Martin72, Andy Chee, kanaron, Mickk, UniSoft, electronx, efectoscluster, samofab, up8051, brucehoult, srce, maxmatteo, bcigsar, George Edmonds, Ocela, JohanH, chekhov, pcprogrammer, Jackster, Smile2016, tatel, StefikMichal, jusaca, marcus h, thechad33ct@gmail.com, Rick2024, 2nOrderEDO, vk6zgo, dirichlet, nali, Laval, tom66, vincentchen2001, shapirus, heksadesimaali, bsw_m, wysp2023, Sorama, valcher, dr_al, BeBuLamar, mikeselectricstuff, wek, Fire Doger, DH7DN, Chris02, welterde, nctnico, Ivan7enych, folays, sagias, Click_whirr, cte, Eltax1693, MarkMLl, jaromir, Lexy, anotherlin, simon51, giovannirat, jellytot, barkevko, tggzzz, ArdWar, hussamaldean, gbaddeley, malagas_on_fire, lapot2, ADJohnson, hankee, koks1960, nueron, Hedrix, Hydron, Oldtestgear, Performa01, silverback, Awp, David_AVD, Shamzeen, ingbird64, RolandK, voltsandjolts, Efig, daisizhou, AlastairKnights, chris7746, Pukker, Farley, pascal_sweden, bmac_2780, 5U4GB, chapai, RAPo, RoGeorge, woody, RiZsho, EEVblog, pasha, marcumr, asmi, costi_b, Roehrenonkel, Ice-Tea, tszaboo, MitjaN, electrovanga, Aldo22, InvisibleMan, Everbrave, RoadRunner, gmb42, The_Spectrum.A_idiot, Berni, iMo, najrao, Paul T, Ranayna, The Soulman, Oly Music, optotester, Boscoe, LM2023, indeterminate, unseenninja, moffy, bin10, jiemelar, coppercone2, wkb, Ian.M, BradC, JPortici, KreAture, morris6, AndySymons, twizla, Fungus, core, veedub565, hansibull, TurboTom, Chalcogenide, ianm42, krasimir.k, thephil, computerchemist, indman, Kean, exe, qmichl, nidlaX, VK6HP, LEER333, tautech, iso, Martin Opresnik, PeteH, michal82, PCB.Wiz, winoga, Zipdox, zheka64, alset, glenenglish, RedBress1234, mig_skyfighter, peter-h

Most Online Today: 4975. Most Online Ever: 7943 (March 13, 2022, 02:41:45 pm)