... And there isn't any LDO oscillation in my scope.
Interesting. Any chance you have an SA and can check the PLL on your non-A DS2000?
Good discussion folks, all opinions are welcome. My motivation was to make circuits work as they should, that is all. But having observed what i observed my equipment shopping list will not have Yaigol again. Life is too short to have too many unknowns.
I don't actually care about the specifics of how your legal system works.In that case why did you make any comments about it in the first place?!
It is also worth avoiding making incorrect comments on subjects you don't know anything about.
I made a comment about getting the system involved at all, which has nothing to do with the mechanics about it. The comment about them not needing to make them profit was tongue in cheek anyway, I don't see why it needs to be held to the same standard as if I seriously claimed they would. None of this invalidates my suggestion that we not get them involved at all.
Not making incorrect comments on subjects I don't know anything about is why I didn't explicitly claim they make money on this.
Pays to read completely.
Good discussion folks, all opinions are welcome. My motivation was to make circuits work as they should, that is all. But having observed what i observed my equipment shopping list will not have Yaigol again. Life is too short to have too many unknowns.
Three, if you could perform tests that demonstrated performance improvement using more common tools (DMM, another scope, signal reference), that would allow more of us following along at home to verify our results.
But having observed what i observed my equipment shopping list will not have Yaigol again. Life is too short to have too many unknowns.
Well, it would have to be........I err, umm, don't own a Spectrum Analyzer (real)......but yes, I was thinking about a video. I have a DS2072 (that thinks it's a DS2202).
Oh men, too much work attaching pictures...
Good discussion folks, all opinions are welcome. My motivation was to make circuits work as they should, that is all. But having observed what i observed my equipment shopping list will not have Yaigol again. Life is too short to have too many unknowns.
Should I, or should I not, invest in a DS1054Z as my first digital scope ?
Oh men, too much work attaching pictures...Nice job on the Pt. 7 post, see you can do it.
Oh men, too much work attaching pictures...Nice job on the Pt. 7 post, see you can do it.Thanks for the tip, tautech, it was a bit messy at first but worked in the end.
Sorry for what may be a silly question, but I think either I am reading things wrong, or I am just suffering from information overload :
Should I, or should I not, invest in a DS1054Z as my first digital scope ?
There is still no other scope out there at this price point with the same specs or real practical use. If $400 is your price point, it's end of story.
There is still no other scope out there at this price point with the same specs or real practical use. If $400 is your price point, it's end of story.There are and with better specs, GDS-1000B series GWinstek. The only advantage of 1000Z is ability to unlock.
Hi..
Bud says lt1038 is a fixed reg ...
but from ds i assume it's adjustable!
how can he change it on the fly ?
i dont understand this step
ah ah bud...this time i discovered this tweak just before you the first mod i've done is a little heatsink on the adc... damn hot ! i could'nt put my finger on without burning first!
now its warm yes , but will not hurt anymore....
Next step, a silent fan !