Atten oscilloscope firmware????

• #25 Reply
  Posted by Crackn on 17 Dec, 2013 20:23
• Hello, the memory ic arrived today.
  I soldered it and I upgraded for 1102CML firmware.
  
  Everything seems to working fine.
  Now i need some suggestions on how to test it. To see if the memory is working as expected.
  
  GS
• #26 Reply
  Posted by bithead9 on 25 Jan, 2014 06:36
• Firmware updates for ATTEN scopes are here: http://www.atten.com.cn/Download/soft/shiboqi/Update/
  I updated my ADS1102CAL with no issues. 
  
  UPDATE: 05/03/2014
  I have the following firmware from around 3/2014 before ATTEN took down the links. 
  If anyone needs them please PM or post back here and I can upload them somewhere.
  
  ADS1000CAL Series_Software Version 3.0_V100R003B01D01P31R16.zip
  
  ADS1000CL+ Series_Software Version 3.0_V100R003B01D01P31R16.zip
  
  ADS1000CML_V100R003B01D01P31R16.ZIP
  
  ADS1202CML_.zip
• #27 Reply
  Posted by Crackn on 29 Jan, 2014 17:08
• Siglent 1102CML firmware: 5.01.02.22
  
  http://siglent.com/uploadfiles/en/files/update/SDS1000CML_Update_EN.rar
  
  Tested and working fine with memory mod.
  
  CAUTION: this firmware is for 1102CML or (Memory Modded CAL, CAL+, CNL) scopes. DO NOT install it if you dont have the memory IC installed first.
  
  GS
  
• #28 Reply
  Posted by hifihifi on 31 Jan, 2014 08:53
• @Crackn: Why you don't use the ATTEN firmware version CML (=with bigger memory)  ? You can download it here http://www.atten.com.cn/Download/soft/shiboqi/Update/
  
  
  Do you have 2 or 3 ADC's? like in picture?
  http://www.pocketmagic.net/wp-content/uploads/2012/10/atten_1102cal_07.jpg
  
  Maybe this is the difference in ADS1102CAL and the ADS1102CAL+
  
  @Crackn: do you have ADS1102CAL or ADS1102CAL+
• #29 Reply
  Posted by hifihifi on 31 Jan, 2014 09:30
• Does anyone know the difference between the ADS1102CAL and the ADS1102CAL+ ?
• #30 Reply
  Posted by Crackn on 01 Feb, 2014 08:27
• Quote from: hifihifi on 31 Jan, 2014 08:53

  @Crackn: Why you don't use the ATTEN firmware version CML (=with bigger memory)  ? You can download it here http://www.atten.com.cn/Download/soft/shiboqi/Update/
  
  Just because siglent's firmware is version 5 and atten firmwares are version 3. old firmware.
  
  Do you have 2 or 3 ADC's? like in picture?
  http://www.pocketmagic.net/wp-content/uploads/2012/10/atten_1102cal_07.jpg
  
  i have the 3 adc version CAL+
  see the attached image.
  
  
  Maybe this is the difference in ADS1102CAL and the ADS1102CAL+
  
  @Crackn: do you have ADS1102CAL or ADS1102CAL+
  

  ---

  
• #31 Reply
  Posted by hifihifi on 01 Feb, 2014 12:31
• Damm, I have the ADS1102CAL, I don't have it opened yep, but I suppose there will only 2 ADC's?
  
  I am wondering how the firmware is detecting if there are 2 or 3 ADC's. If not detecting at all, I need to add memory IC and one ADC and maybe more? Will be more tricky.
  
  
• #32 Reply
  Posted by pickle9000 on 02 Feb, 2014 02:48
• You may want to have a look at this:
  
  https://www.eevblog.com/forum/testgear/atten-asd1102cal-to-siglent-sds1102cml/msg332942/#msg332942
  
  
• #33 Reply
  Posted by hifihifi on 02 Feb, 2014 11:41
• Thanks !
  
  Great news ! 
  
  Looks like ADS1102CAL have 3 ADC's and only new memory chip is needed.
  
  Wondering what's the true difference between ADS1102CAL and ADS1102CAL+ ? If someone know it or find it let me know. Or is it pure marketing?
• #34 Reply
  Posted by pickle9000 on 02 Feb, 2014 19:40
• I don't know about feature wise but that + board looks to have been simplified, the ram is in a different location and some unpopulated connector footprints are gone.
• #35 Reply
  Posted by Crackn on 23 Aug, 2014 08:06
• Teledyne LeCroy WaveAce 1012 firmware: 5.01.02.27
  
  http://teledynelecroy.com/support/softwaredownload/download.aspx?did=8107
  
  Tested and working fine with Siglent 1102CML memory mod. (Original Atten ADS-1102CAL+)
  
  CAUTION: this firmware is for WaveAce 1012 (SDS1102CML or Memory Modded CAL+, CNL) scopes. DO NOT install it if you dont have the memory IC installed first and 3 ADCs board.
  
  GS
• #36 Reply
  Posted by micro88 on 19 Sep, 2014 06:07
• I have a 100MHz Atten DSO model ADS1102C which I purchased in 2009 on ebay.
  Is there any firmware upgrade available for this model ?
  
  Thanks.
  
  
• #37 Reply
  Posted by Vratcz on 07 Oct, 2014 09:31
• Hello,
  I have some troubles with update. My ATTEN 1102CAL oscilloscope died after I updated it by mistake to waveace 100 (I put wrong file to USB stick)
  
  In fact, Oscilloscope stars OK, but there is something like noise on both inputs (looks like the data are taken in the wrong address) -–> the inputs does not works
  
  -When I update back to sieglent1000 (this works in the past!), nothing change – still noise
  -when I update back to atten (1102CAL) – scope says “product type does not match” – so impossible to return back to atten
  
  It looks like the LecRoy change some register that are not affected by other firmwares – AD address, or product type (??)
  
  -I add the memory chip on the board with hope that scope starts working – still noise
  -when run self-calibration, it take ~10minuts
  
  Otherwise, scope works well
  
  Somebody have an idea?
  Somebody have atten 1102CML or CL firmware (not sieglent – this does not work)
  
  Thanks
  
  Vrat
  
• #38 Reply
  Posted by hifihifi on 07 Oct, 2014 10:02
• kgavionics : talks about changing cfg file
  
• #39 Reply
  Posted by Vratcz on 09 Oct, 2014 08:25
• HEllo,
  
  I get the ATTEN CML firmware and the update passed OK, but the problem remain..
  
  I think there is not ATTEN CFG files.. only siglent one
  
  V.M.
  
  
  
• #40 Reply
  Posted by scopeuser on 12 Nov, 2014 22:36
• Hello chaps and thanks for the good advice.
  
  I've updated my Atten ADS1102CAL+ using the SDS1000CML firmware update from Siglent. The scope seems to work OK but I don't have the "cfg" file that you talk of and can't find it on the Siglent site?
  
  would one of you be able to give me a copy of it please?
  
  cheers,
  Phil
• #41 Reply
  Posted by scopeuser on 13 Nov, 2014 11:46
• Ignore my previous post, I just found an update package that contained the config file. All done and good!
• #42 Reply
  Posted by gunrunnerjohn on 29 Nov, 2014 16:44
• OK, I feel dumb.  I looked and many of the links don't seem to work for firmware, not to mention most seem to be for the ADS1102CAL+.
  
  I have the ADS1102CAL (not plus).  The major issue I see is that the calibration process hangs and I have to turn it off.
  
  I'd like to upgrade the firmware, but I don't want to attempt soldering a new memory chip on, that looks a bit daunting.
  
  Is there a source for the firmware and CFG file for my model?
  
  
• #43 Reply
  Posted by jagielonka on 30 Jan, 2015 17:47
• Hello,
   I have an ads1102cal atten crashes at startup on screen home siglent.
  
   Could you send me:
   ADS1000CAL Series_Software Version 3.0_V100R003B01D01P31R16.zip
  
   ADS1000CML_V100R003B01D01P31R16.ZIP
  
   ADS1202CML_.zip
  
  I will try to unlock it.
  
   Thanks in advance.
• #44 Reply
  Posted by Crackn on 05 Feb, 2015 05:12
• UPDATED!
  
  Teledyne LeCroy WaveAce 1012 firmware: 5.01.02.29
  
  List of Changes:
  

  • Fixed a problem where there was jitter on the output signal
  • Fixed a USB Host Initialization Problem

  http://teledynelecroy.com/support/softwaredownload/download.aspx?did=8107
  
  Tested and working fine with Siglent 1102CML memory mod. (Original Atten ADS-1102CAL+)
  
  CAUTION: this firmware is for WaveAce 1012 (SDS1102CML or Memory Modded CAL+, CNL) scopes. DO NOT install it if you dont have the memory IC installed first and 3 ADCs board.
  
  GS
• #45 Reply
  Posted by Micascisto on 22 Mar, 2015 01:05
• Hello everyone,
  
  I have a ADS1102CAL+ and tried to upgrade the firmware with the latest Siglent release for the SDS1000CNL.
  However, it doesn't recognize the firmware update files and the upgrade stops.
  Did you rename those files by chance? I found an old Atten firmware file and it ends in .up instead of .ADS of Siglent firmware files.
  Any help or suggestion is appreciated!
• #46 Reply
  Posted by Neon on 21 May, 2015 17:11
• Quote from: Micascisto on 22 Mar, 2015 01:05

  Hello everyone,
  
  I have a ADS1102CAL+ and tried to upgrade the firmware with the latest Siglent release for the SDS1000CNL.
  However, it doesn't recognize the firmware update files and the upgrade stops.
  Did you rename those files by chance? I found an old Atten firmware file and it ends in .up instead of .ADS of Siglent firmware files.
  Any help or suggestion is appreciated!
  

  
  Hi.
  I think the ADS1102CAL+ is the SDS1102CML ,just download the correct frimware and install it.
  
  http://www.siglent.com/ENs/gjjrj.aspx?id=15&page=1
  
  There is a new frimware but comes without the .CFG file
  we can use the version 13? , I have not tried yet.
  
  SDS1000CML_UpdateCurrent Version: 5.01.02.29 | Published?2015-03-10
• #47 Reply
  Posted by Crackn on 22 Jun, 2015 04:26
• Quote from: Neon on 21 May, 2015 17:11

  Hi.
  I think the ADS1102CAL+ is the SDS1102CML ,just download the correct frimware and install it.
  

  
  Wrong afirmation. ADS1102CAL+ = SDS1102CNL, Do NOT update it to CML if you don't have the memory mod.
  
  cheers,
  
  
  
• #48 Reply
  Posted by Neon on 22 Jun, 2015 11:04
• Quote from: Crackn on 22 Jun, 2015 04:26

  Quote from: Neon on 21 May, 2015 17:11

  Hi.
  I think the ADS1102CAL+ is the SDS1102CML ,just download the correct frimware and install it.
  

  
  Wrong afirmation. ADS1102CAL+ = SDS1102CNL, Do NOT update it to CML if you don't have the memory mod.
  
  cheers,
  
  
  
  https://www.eevblog.com/forum/testgear/siglent-technical-support-join-in-eevblog/new/?topicseen#new
  
• #49 Reply
  Posted by jagielonka on 25 Jul, 2015 08:43
• Hello
  
   My ads1102cal atten is bootloop, how do I unlocked? 
  
  Thanks in advance.