Another dumpster diving save of some… gorgeous … 4x20 VFDs. I like VFDs a lot.
Now I have to find the perfect filter for it. And an application.
Miti
Wow, looks impressive!
Never seen a 4x20 characters of a 7x5 VFD matrix dots before. From what device was it recovered?
I managed to save a load of 112x16 graphical Noritake VFDs from one of my former employers, they were all about to be scrapped. Several have made their way into projects I've created.
I see a lot of wires, does this module have a serial port? Some of them have a small 3 pin header on the board for serial. I think it even breaks out to the parallel header
I see a lot of wires, does this module have a serial port? Some of them have a small 3 pin header on the board for serial. I think it even breaks out to the parallel header
This is 3 lines serial module, but you need to supply 5V, 36V, GND, filament supply.
So what you see there is exactly that, 5 wires going to Arduino and the supplies to the module itself.
Cheers,
Miti
Ah makes sense, I have a 4x40 module that's 5V only, it generates what it needs from that.
Wow, looks impressive!
Never seen a 4x20 characters of a 7x5 VFD matrix dots before. From what device was it recovered?
I'm thinking payphone. The last generation ones with the texting feature.
I'm thinking payphone. The last generation ones with the texting feature.
No, no, no, they are current production, brand new modules.
I've seen current generation industrial kit with these displays fitted. So not surprising they're in production still.
More lifespan/thermally rugged than OLED, wider temperature range (OLED really does not like hot ambient if you drive it bright, VFD doesn't care), they're fairly rugged to physical abuse, and they don't go blurry and slow in subzero temperatures.
But on the other hand high power consumption (makes it difficult for portable devices) and a relatively large form factor make them impractical in other ways.
Fun fact, Noritake make VFDs and fine chinaware for your grandma. An interesting combination of abilities.
I've seen current generation industrial kit with these displays fitted. So not surprising they're in production still.
More lifespan/thermally rugged than OLED, wider temperature range (OLED really does not like hot ambient if you drive it bright, VFD doesn't care), they're fairly rugged to physical abuse, and they don't go blurry and slow in subzero temperatures.
But on the other hand high power consumption (makes it difficult for portable devices) and a relatively large form factor make them impractical in other ways.
Fun fact, Noritake make VFDs and fine chinaware for your grandma. An interesting combination of abilities.
Its not a stretch to imagine that the environmental requirements for both VFDs and fine chinaware are somwhat same.. :-D
long lifespan, rugged, wide temperature range and so on..
Yeah, here in Japan Noritake are known for various types of high grade ceramics both industrial and kitchen, and of course their VFD's, including the Korg Nutube.
Do you have any source for a good filter, something similar to the HP34401 front panel, dark green, about 1mm thick, good transparency? I can’t seem to find any, but I’m not known for finding things.
Cheers,
Miti
Nothing that isn't available on Amazon. Grey smoked acrylic would do the trick.
I bought a pack of thin (maybe 0.8 to 1 mm) plastic sheets on Amazon, various colors. I think they called them acrylic but they were more flexible like polycarbonate. Used some for contrast filters on CRT oscilloscope, as well as VFD displays. My favorite color is "rose", kind of pale pink. It makes the VFD look white, by filtering out some blue and green. Can be combined with smoke for additional contrast. I've also used colored "gel" or cello or cellophane sheets, which are very thin. This needs to go in between the VFD glass and some other durable lens like acrylic.