What's this please? (Component Advice)

[w.v.s.]

And here is the older version. Same question and one additional one: I guess HRS does not stand for "hotel reservation service" in this case. I wondered, if it could mean the connector was fabricated by hirose, since these are the consonants in the name it is also a Japanese company.

[helius]

Yes, that is Hirose's logo.
The first plug may be by Binder, I will look in some catalogs.

[squibby]

What might this be?

Relay in a vacuum so that there is no arc when it breaks or makes. Minimises noise when switching an amp on or off for example. Could be timed, could simply be instantaneous. The vacuum is the key feature.

[Zeyneb]

Hi there,

It would be nice if someone can give a suggestion for that plug on the right.

I'm going to redesign that PCB on the left so I do not need an exact match for that plug. The function is a trigger button assembly for a TIG welder. I did get lost on Digikey's website find a suitable product.  It has to be some kind of card edge design. Because I have to fit it in a torch handle so it must not be too far above or below the level of the PCB. That PCB is 1.6mm in thickness. That plug has a height of 5.5mm and a width of 11.5mm and a length of 9mm. A two position version would be ideal. And of course it is just for very low currents.

Thanks so much for your time.

[w.v.s.]

This seems to go into a similar direction. Maybe some key words are helpful for your search.

https://eu.mouser.com/datasheet/2/123/333_008_500_101___EDAC_Card_Edge_Connector-2105857.pdf

[tszaboo]

The capacitor with the red markings. It has unusually large terminals, that I've never seen before. I expect some capacitor, probably NP0, which has stable frequency response up to 2 GHz, since it's an AC coupling part in a 2 GHz probe.
Anyone has an idea who is the supplier and the series? Is it an Agilent custom part?

[rsjsouza]

Perhaps a MIM capacitor?

https://www.kyocera-avx.com/products/passive-micro-components-pmc/discrete-thin-film-capacitors/transmission-line-mim/

[tszaboo]

Perhaps a MIM capacitor?

https://www.kyocera-avx.com/products/passive-micro-components-pmc/discrete-thin-film-capacitors/transmission-line-mim/

It looks like these:
https://www.kyocera-avx.com/products/broadband-components/ultra-broadband-capacitors-ubc/?utm_source=everythingRF
Except, this part is to new at 2023, the voltage rating is not enough for that design, and it's smaller.

[rsjsouza]

Parts can be made available for vertical customers much earlier than to the general market, with the common secrecy/NDA involved. Besides, that is just AVX, but I wonder if other manufacturers might have released this type of component earlier.