Franky do you sell a 4mm adaptor which has single male one end and double female the other so you can plug 2 test leads in to one binding post ?
No. I can have a look around to see if they are available anywhere. Or as con-f-use says, you can just stack up the plugs.
Hi Franky, how much it costs the PL-50 feed through termination that is shown in the last video of mjlorton.
I'm pricing them at $22 each shipped worldwide ($2.4 additional for tracking). They are made by Rigol. This is the same product (not my link):
http://www.tekequip.com/rigol-impedance-adjuster-50-ohm.html
I have not found any decent unshrouded stackable plugs i like, and don't want to replace the decent plugs on my best leads with crap stackable ones , hence looking for a " splitter "
thanks for the link pickle but they dont half look crap, sorry
thanks for the link pickle but they dont half look crap, sorry
They certainly do, but that is that the general idea?
I just use a small box with 4 females on it. Somehow that does not sound right.
I have not found any decent unshrouded stackable plugs i like, and don't want to replace the decent plugs on my best leads with crap stackable ones , hence looking for a " splitter "
Here's another type of unshrouded stackable banana plugs/test leads I have (but haven't yet been listed in my shop). They were shown briefly in Martin's latest video
at about the 9:00 minute mark.
One thing to note about them is that the wires are screwed on, not soldered.
how long are the probe bits, from the end of the plastic to the tip of the metal ?
they look similar to the plugs on the grabber hook leads you send me ?
also do they except shrouded plugs in the back end ?
how long are the probe bits, from the end of the plastic to the tip of the metal ?
It's slightly shorter than normal, measuring about 17.5mm.
also do they except shrouded plugs in the back end ?
No they don't. Only unshrouded plugs.
Hello Franky,
Is it possible for you to source (gold plated) banana plugs with this sort of spring contacts:
http://www.nakamichiplug.com/pic/0534D-001.jpgdoesn't need to be with metal shells, would actually prefer just normal black&red plastic shells.
In my experience this type of spring contact has been far better than anything else for reliable and low contact resistance. I bought these couple of years ago from Chinese-run electronics shop in Bangkok for very reasonable price but haven't been able to find them anywhere else.
Hello Franky,
Is it possible for you to source (gold plated) banana plugs with this sort of spring contacts:
http://www.nakamichiplug.com/pic/0534D-001.jpg
doesn't need to be with metal shells, would actually prefer just normal black&red plastic shells.
In my experience this type of spring contact has been far better than anything else for reliable and low contact resistance. I bought these couple of years ago from Chinese-run electronics shop in Bangkok for very reasonable price but haven't been able to find them anywhere else.
So basically something like this but gold plated?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=171030386766
I'm very happy with my second purchase from Franky. Thank you again. :-) I'm waiting to see your online sore open. :-)
Hi am a regular customer of Franky, bought some nice products from him such as Rigol power supply, frequency generator and oscillocope, he is a nice seller keep it up
regards
shailesh from Mauritius
I'm very happy with my second purchase from Franky. Thank you again. :-) I'm waiting to see your online sore open. :-)
Hi am a regular customer of Franky, bought some nice products from him such as Rigol power supply, frequency generator and oscillocope, he is a nice seller keep it up
regards
shailesh from Mauritius
Thank you sonny and shailesh! Your businesses are very much appreciated!
I currently have 2 sets of Uni-T UT61E available for sale. As many of you know I used to stock these but not anymore. I got these 2 sets while custom ordering one for another customer (just so I can lower the average shipping cost). Price is $51 for the USA and $53 for everywhere else, shipping with tracking number included. Please post here or PM me if interested. First come first serve.
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!
Yes, I have. Will post some pictures later later today when I get back to the shop. I am still way behind in posting a lot of the stuff I already have in stock...
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!
Yes, I have. Will post some pictures later later today when I get back to the shop. I am still way behind in posting a lot of the stuff I already have in stock...
Great news! Haha, I know how that is. You almost need another vacation just to recover from all of the catchup you are playing after your previous vacation. Take your time mate. It's no rush.
Hi franky,
kindly let me know if you have some dummy loads- electronic controlled
regards
shailesh
Hey Franky, any update on finding some decent Kelvin leads? Now that I have a better quality meter (I traded some stuff I had laying around for a 34401A) I am looking a bit more intently. Cheers mate!
OK, here's what I've got. It's a kit, so you will need to do some soldering and heat shrinking. Which may be more work, but you get to control the quality of the soldering and assembly work. You can also customise the length of the wires.
The kit comes with a pair of good quality gold plated kelvin clips, 4 pieces of 13AWG silicone wires each about 60cm long (2 black + 2 red), a pair of black and red heat shrink tubing, and 2 pairs of banana plugs (choice of either shrouded or unshrouded).
Price on the forum would be $19 per set worldwide shipping included (without tracking). Tracking would be an additional $2.4.