I dont care about not reaching 1GHz but I want to have the 5Gs/s and <1ns/div. is that possible?
I dont care about not reaching 1GHz but I want to have the 5Gs/s and <1ns/div. is that possible?
IME not just by using the 1GHz or bandwidth upgrade options. I believe there's a hardware change on the analog board, but how the scope know I don't know. If you try to use the 1GHz or BW5T10 options for example, it just goes back to 100MHz on my MDO3014.
I dont care about not reaching 1GHz but I want to have the 5Gs/s and <1ns/div. is that possible?
IME not just by using the 1GHz or bandwidth upgrade options. I believe there's a hardware change on the analog board, but how the scope know I don't know. If you try to use the 1GHz or BW5T10 options for example, it just goes back to 100MHz on my MDO3014.
I thought only the front end is different than the 1GHz version but the acquisition parts are the same, i mean same ADC etc...so I was hoping to get the 5Gs/s at least...too bad
I dont care about not reaching 1GHz but I want to have the 5Gs/s and <1ns/div. is that possible?
IME not just by using the 1GHz or bandwidth upgrade options. I believe there's a hardware change on the analog board, but how the scope know I don't know. If you try to use the 1GHz or BW5T10 options for example, it just goes back to 100MHz on my MDO3014.
probably there are some ID resistors that must be changed too...still I think the only difference must be just he front end, so 5gs/s should be possible...
gen.py MDO4054C C012345 500MHz DVM DDU AFG BW5T10 MSO TRIG EMBD COMP ENET USB PWR AUDIO AERO AUTOMAX LMT VID SEC
Hi
Any idea if the source code given for the keygen would work on a modern 3-series MDO32 or MDO34 ?
Thanks
Any idea if the source code given for the keygen would work on a modern 3-series MDO32 or MDO34 ?
Excuse me.
How to get MDO34 AES key from 3-series FW?
I write a C code to generate UID of MDO3 series scopes.
It was tested in WIN10 with tcc-0.9.27-win64-bin and tcc-0.9.25-win32-bin.
Welcome interested friends to download.
Usage:
Input scope model number and serial number according prompt.
Notice:
All letters are capitalized.
See the GenerateUID.c and GenUID.jpg.
I write a C code to generate UID of MDO3 series scopes.
It was tested in WIN10 with tcc-0.9.27-win64-bin and tcc-0.9.25-win32-bin.
Welcome interested friends to download.
Usage:
Input scope model number and serial number according prompt.
Notice:
All letters are capitalized.
See the GenerateUID.c and GenUID.jpg.Hello!
Can you help me to activate. I go to menu, type the key that was generated by your script but have a message "Invalid license"
So how to use it. Please write step by step.
Thank you!
I write a C code to generate UID of MDO3 series scopes.
It was tested in WIN10 with tcc-0.9.27-win64-bin and tcc-0.9.25-win32-bin.
Welcome interested friends to download.
Usage:
Input scope model number and serial number according prompt.
Notice:
All letters are capitalized.
See the GenerateUID.c and GenUID.jpg.Hello!
Can you help me to activate. I go to menu, type the key that was generated by your script but have a message "Invalid license"
So how to use it. Please write step by step.
Thank you!My code is not keygen.
It just generate UID.