Forecast western markets release mid 2022.
Math channels 2 (note: Average and ERES are now rt acq modes, they are not channel math.)
FFT is 2M
3 acquisition modes.
- Auto (this is Normal default mode with user definable memory max limit.)
- Fixed samplerate
- Fixed memory length
3 acquisition modes.
- Auto (this is Normal default mode with user definable memory max limit.)
- Fixed samplerate
- Fixed memory length
Here's an old screenshot just to demonstrate, what a proper 12 bit acquisition system can do.
Mind you, this is not from an SDS2000X HD, yet shows the same effect.
12Bit_VRes
You can see a rising ramp in Dots display mode and 100x vertical zoom.
You can count the dots (represented by short dashes) within one vertical division in the zoom window: it is 4.25 steps, i.e. 4.25 LSB.
This results in a total of 4.5 * 100 * 8 = 3400 LSB for the full screen hight of 8 divisions and still leaves about 0.8 divisions headroom above and below the visible screen area.
And you should value the evenly spaced steps, which hint on a very high linearity of a properly calibrated ADC. Nothing like the cheap solutions up to even 14 bits, where the dots would be all over the place because of the high DNL/INL, and the transfer curve might not even be guaranteed to be monotonic.
Here's an old screenshot just to demonstrate, what a proper 12 bit acquisition system can do.
Mind you, this is not from an SDS2000X HD, yet shows the same effect.
12Bit_VRes
You can see a rising ramp in Dots display mode and 100x vertical zoom.
You can count the dots (represented by short dashes) within one vertical division in the zoom window: it is 4.25 steps, i.e. 4.25 LSB.
This results in a total of 4.5 * 100 * 8 = 3400 LSB for the full screen hight of 8 divisions and still leaves about 0.8 divisions headroom above and below the visible screen area.
And you should value the evenly spaced steps, which hint on a very high linearity of a properly calibrated ADC. Nothing like the cheap solutions up to even 14 bits, where the dots would be all over the place because of the high DNL/INL, and the transfer curve might not even be guaranteed to be monotonic.
QuoteForecast western markets release mid 2022.
With 12bit native resolution....
I´m very curious about the entry price then.
QuoteForecast western markets release mid 2022.
With 12bit native resolution....
I´m very curious about the entry price then.
Its price starts at 22,880 RMB (about 3,600 USD)
Lower noise floor (e.g. 70 µVrms @ 1 mV/div, 500 MHz bandwidth, 50 ohms)
QuoteBy now it should be clear that pricing in China and EU/rest of the world is quite different. So that is not important.
Hard to believe that something will be cheaper selling in the EU than in china.Yet for new Siglent products when they hit western markets they have always been cheaper than in the China marketplace.
And regarding the scope: Which ADC is used?
Excuse my ignorance but is there any chance that this scope would be able to do some oversampling to get more than 12-bit resolution?
12bit native resolution won´t be enough for your purposes ?
Btw, Eres is also avaible on this scope.
And regarding the scope: Which ADC is used?
And how would we know.. This whole discussion here is just a chat about datasheet. Nobody yet has one, much less have opened it.... There will be some time before it get released to the world...
And regarding the scope: Which ADC is used?
And how would we know.. This whole discussion here is just a chat about datasheet. Nobody yet has one, much less have opened it.... There will be some time before it get released to the world...
Well, there are some insiders here, so if it is not a secret they could already have asked. And if it is a secret, than having a teardown won't help either.
12bit native resolution won´t be enough for your purposes ?
Btw, Eres is also avaible on this scope.
I do strictly audio work so the more the merrier I guess...
Martin72, how do you like the Neutrik?
One of the chaps has a 12 bit Chinese 6000 on here I believe perhaps we could set up a couple of benchmarks with the 4000HD I still have a couple here.
I confirmed that SDS2000X HD models will be in the global market in July.
Here are some SDS2000X HD spec data