What did you buy today? Post your latest purchase!

[KNSSoftware]

Anyone think this used power supply was worth $20? It's a piece of Radio Shack history, if that makes a difference. The store I stopped in today is days from closing forever, so they're selling EVERYTHING. They had a whole table of equipment that they actually used for repairing electronics! I don't even know what some of the stuff was, and everything besides the power supply was $100 or more. Assuming it works I think I did ok.  I like the volt range switch much better than the cheapie I got on eBay a few months back.

Sent from my XT1565 using Tapatalk

Any good?  Found it's UK siblings on amazon
https://www.amazon.co.uk/Adjustable-Regulated-Bench-Supply-BAKU-1502D/dp/B00MA01L92/ref=sr_1_16?ie=UTF8&qid=1506631073&sr=8-16&keywords=bench+power+supply

Bit concerned about the earth though, and shipping would make up 25% of the cost, which is a bit rich!

[rsjsouza]

I've been meaning to restart working on programmable logic for quite some time, but I couldn't get a decent kit for an affordable price. A coworker was selling an Altera DE2-115 for quite a cheap price.

[razberik]

That Rigol DP832 is absolutely perfect PSU in one particular term. If you share some test equipment with some of your colleagues - nobody will EVER borrow this Rigol from you.

[Specmaster]

When I saw the thread earlier today, I ummed and erred but finally succumbed and invested £20 on one of these, it may come in handy, but being a confirmed TEA member how could I ignore it 

[djos]

When I saw the thread earlier today, I ummed and erred but finally succumbed and invested £20 on one of these, it may come in handy, but being a confirmed TEA member how could I ignore it 

Hmmm, I assume it uses the iPad as the display?

Do you have a link, I'm very curious now.

[Specmaster]

When I saw the thread earlier today, I ummed and erred but finally succumbed and invested £20 on one of these, it may come in handy, but being a confirmed TEA member how could I ignore it 

Hmmm, I assume it uses the iPad as the display?

Do you have a link, I'm very curious now.

Here is the link https://www.eevblog.com/forum/testgear/vellerman-wfs210-wireless-oscilloscope-for-only £20

[djos]

Here is the link https://www.eevblog.com/forum/testgear/vellerman-wfs210-wireless-oscilloscope-for-only-20-!/msg1310894/#msg1310894

Cheers, that's a neat unit - the seller doesnt ship to Aus (and the ones that do are over $150 AUD shipped) so looks like I'll be shipping one to my mother in-law for re-shipping! (they have to be good for something right?)

[neo]

Well not today but recent, a ticket to the loony bin disguised, ever so cleverly, as a fluke 8200A.

[GreyWoolfe]

I bought an Aneng AN-8008 based on the thread.  If it does what I need, I will invest in another as a spare in case I lose it.  just have to wait for the slow boat from China.

[nanofrog]

I bought an Aneng AN-8008 based on the thread.  If it does what I need, I will invest in another as a spare in case I lose it.

You mean if one of the dogs decides it'll make a wonderful chew toy?   

[URI]

I bought a NOS adapter to convert IEC625 (mechanically SUB-D 25) to IEEE488 (GPIB) several days ago that arrived yesterday.

Just for the case I ever come across a piece of equipment that only has an IEC625-connector.. 

[Jeroen3]

I know those corner bumpers are doing a good job but I can't help but think they look really ugly stuck on there, there has to be a better more designed solution to the problem. The rest of it is lovely though, real test gear porn...

The corner bumps on the front aren't even big enough, the banana plugs bump the wall first. They should have used the isolated banana plugs, and provide a bag of these.

[Specmaster]

[quote author=KNSSoftware link=topic=47932.msg1312481#msg1312481

Any good?  Found it's UK siblings on amazon
https://www.amazon.co.uk/Adjustable-Regulated-Bench-Supply-BAKU-1502D/dp/B00MA01L92/ref=sr_1_16?ie=UTF8&qid=1506631073&sr=8-16&keywords=bench+power+supply

Bit concerned about the earth though, and shipping would make up 25% of the cost, which is a bit rich!
[/quote]

OK but they are limited to 2A at 15v, I find the 5A at 30vdc versions are better though but cost about double the price. Many of the better old transistor radios need 18v to power them. Never had the need to use anywhere near 5A yet but the increased headroom is nice, runs cooler and means if it has a fan, it will be quieter in operation and that is a real bonus.

[Rbastler]

Got today my Banggood order from around two weeks ago. The postman stuffed my package into the mail box in a way I actualy had difficulties getting it out  .
I bought a Astrolux S1. Its a really nice flashlight. The videos I saw about it didnt lie. Since I discovered minerals as a new hobby, next year I want to go in the mountains with a collectors licence and hopefully find some and I tought a good flashlight might come in handy.
I also got myself some decent USB to Micro USB cables that can carry more current. My old cables had quite some voltage drop.

[ChrisLX200]

Bought 50x small flip-top boxes (1"-ish cube) for storing SMD components, and also 5,500 piece 'sample book' of SMD resistors and caps.

ChrisH

[BU508A]

I've received today:

- 50 pieces of Hartmann rotary switches, type PT 65 501 (dec)
- 50 pieces of Hartmann rotary switches, type PT 65 503 (hex)

Both types were coming with the segment wheel on top.

Link to the manufacturer's website:
https://www.hartmann-codier.com/products/rotary-code-switches/pt65/

Pictures:

The 501:


The 503:


With the segment wheel:

[cdev]

What is the best thing to do on ebay when a package that was being shipped to you (alleged to be a Uni-T UT210E)

is delivered to the wrong address and likely was part of a scam? How to handle it? Ive sent a message to the seller telling them the package went to the wrong address and tried to figure out how to bring in ebay customer service but it appears that even though it was delivered to the wrong address they seem to want me to wait until the date I am supposed to receive it by.. which isnt acceptable. The seller seems to have gotten a few other complaints of a similar nature recently.

[Specmaster]

What is the best thing to do on ebay when a package that was being shipped to you (alleged to be a Uni-T UT210E)

is delivered to the wrong address and likely was part of a scam? How to handle it? Ive sent a message to the seller telling them the package went to the wrong address and tried to figure out how to bring in ebay customer service but it appears that even though it was delivered to the wrong address they seem to want me to wait until the date I am supposed to receive it by.. which isnt acceptable. The seller seems to have gotten a few other complaints of a similar nature recently.

About all you can do is keep contacting the seller via Ebay and also keep contacting Ebay via their dispute channel. That way after the due delivery date has been and gone, they cannot claim that it is too late to raise a claim because the email trail is there to prove that you flagged it up earlier and that they told you to wait.

Keep copies of the emails to and fro as well, just as insurance should you need it.

[rsjsouza]

I've been meaning to restart working on programmable logic for quite some time, but I couldn't get a decent kit for an affordable price. A coworker was selling an Altera DE2-115 for quite a cheap price.

Absolutely love Terasic kits. Extremely satisfied with my 4 Terasic products:

Thanks for confirming the manufacturer is worth its salt. The kit looks quite alright but I know these things can be deceiving (bad support, unreliability, etc.)

[GreyWoolfe]

I bought an Aneng AN-8008 based on the thread.  If it does what I need, I will invest in another as a spare in case I lose it.

You mean if one of the dogs decides it'll make a wonderful chew toy?   

If either one of them would do it, it would be the big dumb-*ss doberman mix.  However, this will live in my tool bag in my company van so no chance of him chewing on it.  He can't work the remote either, he has no thumbs!!!  If I get a spare, it will live in my tool chest in my office with my other meters.  I keep it locked and, like the remote, he can't work the key either. 

[djos]

Bought the WFS210 DSO yesterday, which has given me the excuse I needed to buy the JTAG / SPI / PIC adapter for my eprom programmer.

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4310

[ChrisLX200]

Aoyua 474A+ de-soldering gun. It sucks and I was running out of braid anyway... 

ChrisH

[nanofrog]

Aoyua 474A+ de-soldering gun. It sucks and I was running out of braid anyway... 

It might suck  , but you'll still want quality desolder braid/wick to clean up the pads afterwards. 

[Specmaster]

Aoyua 474A+ de-soldering gun. It sucks and I was running out of braid anyway... 

It might suck  , but you'll still want quality desolder braid/wick to clean up the pads afterwards. 

How very true 

[Specmaster]

Just bagged myself a Fluke 8505A 6.5 digit bench meter on fleabay from the USA. I'll post a picture when it arrives if anyone is curious.