Author Topic: What did you buy today? Post your latest purchase! (Read 4958896 times)

rsjsouza · « **Reply #7225 on:** September 22, 2018, 04:40:34 pm »

Nice! A few months ago I got a HP95LX and love it.

loxodes · « **Reply #7226 on:** September 22, 2018, 08:29:30 pm »

I picked up a E4418B power meter, 8481A power sensor, and 11730A cable

TERRA Operative · « **Reply #7227 on:** September 22, 2018, 08:41:44 pm »

Quote from: rsjsouza on September 22, 2018, 04:40:34 pm

Nice! A few months ago I got a HP95LX and love it.

Oh cool. Oldest of the old school, that was the first PDA model!

plazma · « **Reply #7228 on:** September 23, 2018, 11:02:53 am »

Found a used 3Dconnecion SpaceNavigator for cheap.

3D printed a case for it.

Link:https://www.thingiverse.com/thing:1895175

Works great with Fusion360.

Also panning and zooming in CircuitStudio is super smooth

URI · « **Reply #7229 on:** September 23, 2018, 07:33:33 pm »

YAPM*.

Acquired a classical HP 432A Power Meter as spare/parts mule for my existing one I have a calibrator for to calibrate the 432A with to calibrate a 437B with.

_{*- Yet Another Power Meter.}

beanflying · « **Reply #7230 on:** September 24, 2018, 07:21:52 am »

Needed to make some custom rubber feet for a job. This is the excuse and justification

Buy a 2nd 3D Printer (Ender Pro), Flexion Extruder and some Filament to double the purchase price. Result will be the most expensive Rubber feet going

aargee · « **Reply #7231 on:** September 24, 2018, 08:02:25 pm »

A ha, but when you start talking ‘custom’ anything, the $ often goes up to $$$$.

PartialDischarge · « **Reply #7232 on:** September 25, 2018, 07:14:58 am »

Used TESA caliper, good quality and no batteries, can measure with 0.005mm resolution with good pulse

bob225 · « **Reply #7233 on:** September 25, 2018, 05:13:15 pm »

Today has been a bit of a Revelation

I know its not the best but its budget friendly and a lot better than the plastic junk Bresser supply with a scope - the focuser is a Orion one (cast metal) to replace the broken plastic one

Macbeth · « **Reply #7234 on:** September 25, 2018, 08:20:37 pm »

Quote from: plazma on September 23, 2018, 11:02:53 am

Found a used 3Dconnecion SpaceNavigator for cheap.

3D printed a case for it.

Works great with Fusion360.

Also panning and zooming in CircuitStudio is super smooth

To me it looks like you designed a 3D printed prison for your SpaceNavigator, using your SpaceNavigator

BFX · « **Reply #7235 on:** September 25, 2018, 09:03:59 pm »

Heh I won also one on eBay but brand new. (around half a common price)
But I'm working in Inventor ... and with this mouse its another story:)

Cubdriver · « **Reply #7236 on:** September 26, 2018, 01:19:12 am »

Quote from: BFX on September 25, 2018, 09:03:59 pm

Heh I won also one on eBay but brand new. (around half a common price)
But I'm working in Inventor ... and with this mouse its another story:)

Been using one with SolidWorks for years now. VERY useful device!!

-Pat

plazma · « **Reply #7237 on:** September 26, 2018, 07:05:51 am »

Quote from: Macbeth on September 25, 2018, 08:20:37 pm

Quote from: plazma on September 23, 2018, 11:02:53 am
Found a used 3Dconnecion SpaceNavigator for cheap.

3D printed a case for it.

Works great with Fusion360.

Also panning and zooming in CircuitStudio is super smooth

To me it looks like you designed a 3D printed prison for your SpaceNavigator, using your SpaceNavigator

The control knob is sensitive for shocks (it may start to drift too much so calibration can not compensate). This case makes contract with the base only. I use the case for storage and transportation.

Mr.B · « **Reply #7238 on:** September 27, 2018, 04:10:39 am »

HVP-70
EEVBlog Differential Probe.
Shipped from Sydney yesterday at 5:30pm NZ time.
Delivered today 4:00pm NZ time.

rx8pilot · « **Reply #7239 on:** September 30, 2018, 12:33:22 am »

Quote from: Mr.B on September 27, 2018, 04:10:39 am

HVP-70
EEVBlog Differential Probe.
Shipped from Sydney yesterday at 5:30pm NZ time.
Delivered today 4:00pm NZ time.

I want 3 of those pretty bad.....but I have to wait until I escape my cash-flow crisis.

Pretty quick response time on the shipping!

bitseeker · « **Reply #7240 on:** September 30, 2018, 12:36:26 am »

You might want to get them soon since Dave's clearing out his stock of them.

rx8pilot · « **Reply #7241 on:** September 30, 2018, 01:40:48 am »

Quote from: bitseeker on September 30, 2018, 12:36:26 am

You might want to get them soon since Dave's clearing out his stock of them.

Looks like they are all gonsky....

bitseeker · « **Reply #7242 on:** September 30, 2018, 02:04:42 am »

Oh, I guess I should've checked, first. D'oh!

VEGETA · « **Reply #7243 on:** September 30, 2018, 05:31:37 am »

I bought a used Playstation 2 slim for tearing it down in my channel Thundertronics. I am looking for a PS 1 for the same reason (prefer giveaway if possible and I cover shipping).

Terry01 · « **Reply #7244 on:** September 30, 2018, 06:08:55 pm »

I bought 1 of these and they are awesome! I got it from these guys. It took a few days as it came from Germany but well worth the wait. It really is an awesome product!

https://www.ebay.co.uk/itm/upscreen-Scratch-Clear-Screen-Protector-for-Fluke-MultiMeter-289-Scratch-proof/362409603431?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

MrMobodies · « **Reply #7245 on:** October 02, 2018, 12:22:37 am »

I brought some non standard no-name cheap wong hung lo sata interface adaptors for an Apple Air SSD for a customer. I couldn't find any quality ones selling. I was a bit worried as I read that the regulators on them can get hot.

Wouldn't use the bundled USB3 sata controllers

beanflying · « **Reply #7246 on:** October 02, 2018, 01:04:47 am »

Excuse me but is your fridge running ..... No

Even has room for one more Mmmmm

Ender 3's and heated/silenced filiment storage $50

Fortran · « **Reply #7247 on:** October 02, 2018, 05:24:41 am »

Great idea

TERRA Operative · « **Reply #7248 on:** October 02, 2018, 06:22:33 am »

Stock it up with some sacks of dessicant, and that would turn out to be a nice insulated and relatively soundproof box. Nice.

Jeroen3 · « **Reply #7249 on:** October 02, 2018, 11:33:54 am »

Quote from: MrMobodies on October 02, 2018, 12:22:37 am

I brought some non standard no-name cheap wong hung lo sata interface adaptors for an Apple Air SSD for a customer. I couldn't find any quality ones selling. I was a bit worried as I read that the regulators on them can get hot.

Wouldn't use the bundled USB3 sata controllers

I might be mistaken, bus doesn't Apple use the PCI Express variant of the M.2 SSD?


EEVblog® Main Site	EEVblog® on Youtube	EEVblog® on Twitter	EEVblog® on Facebook	EEVblog® on Odysee

Author Topic: What did you buy today? Post your latest purchase! (Read 4958896 times)

Share me