What did you buy today? Post your latest purchase!

[Ed.Kloonk]

OT...Non electronic Stuff from street sales in Paris....

Seiko watch chronogr, Ti  EU50
German Rowenta ceramic heater EU10
three great bluejeans....EU8

What fun...
Jon

In the late 80's I recall buying similar fare on the streets in a town called Kuta, Bali.

10 bucks for a Rolex.

Dandy.

[gamalot]

A pack of AA size batteries, their packaging is very different from what the Amazon website shows. 

[PlainName]

Yeah, some of the pics on Amazon don't even relate to the product! But in that case it looks to me like the Amazon image isn't packaged batteries, just a bunch of them together, with a label, 'for display'. At least, if they are packaged they're using invisible wrap.

[gamalot]

Yeah, but the packaging is obviously not for the Australian market.

[armandine2]

Arrived in the post today - Kasap Principles of Electronic Materials and Devices 3rd Edition (McGraw-Hill International Edition, 2006)

I had gotten it recently, from Oxfam, but that printing was a little washed out and had missing pages (an Indian edition maybe?)  well was for charity

[Ed.Kloonk]

Arrived in the post today - Kasap Principles of Electronic Materials and Devices 3rd Edition (McGraw-Hill International Edition, 2006)

I had gotten it recently, from Oxfam, but that printing was a little washed out and had missing pages (an Indian edition maybe?)  well was for charity

The expurgated version?

[beanflying]

Amazon Prime Days and I am WEAK 

Creality Sprite Pro Extruder kit for one of my Ender3 Pros and a Roll of Carbon/Nylon and the hardened Steel Nozzles to suit.

A few packs more of Enerloops because they are cheap and I am almost out of 'spares'.

16Gb kit of DDR3 for my 80 year old Mothers ancient Laptop because 80-90% of Memory usage of its 4Gb looking at an Email and PDF is way way to painful, nearly as painful is explaining to her that her computer has the speed of an 80 year old 

[tom66]

Last week, but I bought an Ender 3 Pro S1 Plus.  So far liking it - print quality excellent and easy to set up - though some of the touchscreen firmware is a bit crap. 

[McBryce]

Last week, but I bought an Ender 3 Pro S1 Plus.  So far liking it - print quality excellent and easy to set up - though some of the touchscreen firmware is a bit crap.

I changed to the Ender Touchscreen, but it was missing basic functions that I use, such as filament change (for multiple colour prints) and even manual filament change wasn't properly implemented. I changed back to the old screen with the knob and spun my own version of Marlin and could add what I wanted. The touchscreen firmware is closed source, so adding features yourself can't be done.

McBryce.

[RAPo]

I bought a button-pressed step attenuator.

[ledtester]

I bought a button-pressed =https://nl.aliexpress.com/item/1005004883750098.htmlstep attenuator.

Fixed link:

https://nl.aliexpress.com/item/1005004883750098.html

RF POWER Stepped Variable Key Button Press Step Attenuator RF SMA-F 5W 3GHz 90dB

[RAPo]

thnx.

[DiTBho]

titanium bike bottle cage, made by a master craftsman

[armandine2]

The expurgated version?

either way, I've been Kasap'd twice.

[DiTBho]

MP720015 EU-UK, DMM, Handheld DSO, one channel @60 MHz, 500 MSPS, 24 kpts, 5.8 ns
+ bag
+ extra battery
+ 8GB usb penstick to save waveforms

paid 130 euro, second hand
(brand new is ~ 220 euro)

[Microcheap]

A KEL103 300W programmable electronic DC load.

[wkb]

A set Gedore tools, new in the bag.

[duckduck]

Patco PTS-30 Teflon Thermal Wire Stripper.

It is used, but the original owner ended up not using it for the planned project, so it is in great condition.

https://patcoinc.net/products/pts30/

[Microcheap]

A new set of pliers and wire strippers.

[armandine2]

just ordered a couple potentiometers with 1/4-inch shafts, on the basis that my haul of old knobs will not be 6mm diameter.

https://www.eevblog.com/forum/projects/fitting-6-26mm-pot-shaft-to-a-6mm-knob/

[tautech]

Needed a few cheap 8GB USB sticks....they all seem to work.....
https://www.aliexpress.com/item/1005003409543124.html?

[macboy]

Arrived in the post today - Kasap Principles of Electronic Materials and Devices 3rd Edition (McGraw-Hill International Edition, 2006)

I had gotten it recently, from Oxfam, but that printing was a little washed out and had missing pages (an Indian edition maybe?)  well was for charity

Dr. Kasap was my materials science and optoelectronics professor in uni. I might still have a zero-th edition of that textbook... He gave the class a pre-print version as the text for his class, and offered extra credit for finding mistakes. I don't recall anyone collecting on that.

[armandine2]

just ordered a couple potentiometers with 1/4-inch shafts, on the basis that my haul of old knobs will not be 6mm diameter.

https://www.eevblog.com/forum/projects/fitting-6-26mm-pot-shaft-to-a-6mm-knob/

initial count was 4 to 3 metric to imperial 

[RAPo]

A Micsig STO1004 for field work.

[iJoseph2]

Hioki 3664 optical power meter