-
Metrology Meeting in Stuttgart/Germany
Posted by
branadic
on 05 Mar, 2019 22:11
-
Hi to everyone,
since we have world metrology day in May 2019 and a few new LTZ reference boards are around, I just want to check if there is an interest in a bigger Volt Nut meeting (up to 50 people) and if so what would be the best time?
We could use a room at my work location for free, but need to arrange some catering. The idea is that everyone can arrive on friday and set up his equipment to stabilize to ambient temperature. We could use the evening to have some beer. in the local pubs.
The meeting itself is on the following saturday, starting at about 9:00am. Hopefully we can manage to get some talks, a small flea market, measurement and comparison sessions and good discussions.
What do you think?
-branadic-
-
#1 Reply
Posted by
e61_phil
on 05 Mar, 2019 22:20
-
Great idea!
-
#2 Reply
Posted by
TiN
on 06 Mar, 2019 04:10
-
I wish I'd be closer
-
#3 Reply
Posted by
branadic
on 06 Mar, 2019 06:54
-
Well, for those of you with a long way I can offer at least one guest bed.
-branadic-
-
#4 Reply
Posted by
try
on 06 Mar, 2019 12:10
-
Hi branadic,
good idea!
I already scheduled a week for holiday in May and would need to know the exact date to see if it fits.
Best regards
try
-
#5 Reply
Posted by
Sprock
on 06 Mar, 2019 12:13
-
Hello Branadic
try to be one of the 50.
Thanks for the offer
regards
Sprock
-
#6 Reply
Posted by
Andreas
on 06 Mar, 2019 20:22
-
Hello branadic,
count me in for the saturday
with best regards
Andreas
-
#7 Reply
Posted by
DC1MC
on 06 Mar, 2019 20:27
-
+1 if you allow some uncalibrated Datron
.
Cheers,
DC1MC
-
#8 Reply
Posted by
e61_phil
on 06 Mar, 2019 20:38
-
+1 if you allow some uncalibrated Datron .
Cheers,
DC1MC
After that meeting it is no longer uncalibrated
I build the calibration fixtures for my Datron 1071 a couple of years ago..
-
#9 Reply
Posted by
DC1MC
on 06 Mar, 2019 20:45
-
+1 if you allow some uncalibrated Datron .
Cheers,
DC1MC
After that meeting it is no longer uncalibrated
I build the calibration fixtures for my Datron 1071 a couple of years ago..
Bring them on
!!!
-
#10 Reply
Posted by
Zucca
on 07 Mar, 2019 09:00
-
Tentatively yes, SWMBO needs to approve.
I still consider myself a baby in this metrology planet, so during the discussions I will be the one with a lot of questions and with this face
after you replied me.
I will join the party with my K. 7510 and 34461a, can I bring also my LCR 4263B puppy?
If everything (no rush
TiN ) goes well I will also have one of those:
Also if I manage to put the LTZ into the 3245, I will also bring it...
PS: I will also bring my zombi K2001 from under the bench (forgotten project). There I want to investigate the swap of the VR801 Zener with a 2DW23x...
Can you guys bring me some Ultra Low Noise Reference 2DW232, 2DW233, 2DW23x? I need to buy 1-3 of those.
We need also to contact Adrian:
https://www.ab-precision.de/aka
ap:
https://www.eevblog.com/forum/profile/?u=120589Kleinstein?
-
#11 Reply
Posted by
branadic
on 07 Mar, 2019 21:23
-
I was thinking of a date after world metrology day, so enough time to plan and organize everything. I was also hoping to have Henrik from PTB on board with a keynote speech, but everyone else is welcome to talk to the community with an interesting topic.
I would like to have Adrian and Frank on board, so hopefully they see this thread.
So please feel free to suggest a date and announce what you can contribute. The more we know what we have, the better we can plan and make it a value event.
-branadic-
-
#12 Reply
Posted by
Dr. Frank
on 07 Mar, 2019 22:03
-
Hello branadic,
that's really a very good initiative, and a MUST to join.
If that's the 25th of May, I may have a problem if I have to play Tennis that Saturday, but June 1st would be safe.
Anyhow, count me in, I will come.
Frank
-
#13 Reply
Posted by
e61_phil
on 08 Mar, 2019 07:58
-
I really appreciate the idea of talks. I think that is much more useful than any experiments in the very limited time.
-
#14 Reply
Posted by
DC1MC
on 08 Mar, 2019 11:35
-
I really appreciate the idea of talks. I think that is much more useful than any experiments in the very limited time.
Can't we do both
?
-
#15 Reply
Posted by
ap
on 08 Mar, 2019 14:46
-
Would try to join. Maybe not just voltnuts stuff but also stuff around resistors and capacitors and others; you name it?
-
-
I will try to be there as well.
Sounds like a really great idea!
-
#17 Reply
Posted by
branadic
on 08 Mar, 2019 15:28
-
Okay, I changed the title into Metrology Meeting 2019 so everything around metrology is covered.
I can offer a talk about precision inclination measurement and hopefully show one or two metrology grade sensors.
Nice that the interest is growing
-branadic-
-
#18 Reply
Posted by
hwj-d
on 08 Mar, 2019 16:51
-
-
#19 Reply
Posted by
chris_11
on 11 Mar, 2019 21:01
-
Hello,
If it is the weekend 24th 25th May I like to come. Will bring an uncalibrated 3458A and a few LTZ1000 given that I have stuffed the boards by then.
BR
Christian
-
#20 Reply
Posted by
ober
on 11 Mar, 2019 21:08
-
2019-05-24/-25 would work for me, too (2019-05-31/-06-01 won't).
(Might bring an HP3458A and an R6581D, but would need some transport from Northern Germany for the heavy stuff.)
-
#21 Reply
Posted by
ap
on 12 Mar, 2019 08:56
-
24/25 will not work for me unfortunatelly, only 31/1 would. Thought I would bring some standards with me for attendees to use for calibration, if thats of interest. Maybe some selected meters (precision C-meter or so). Guess there wil be enough 3458As anyway
.
-
#22 Reply
Posted by
Calvin
on 13 Mar, 2019 17:15
-
Hi,
I´m generally also interested to come, but can´t make it fixed yet.
regards
Calvin
-
#23 Reply
Posted by
cat87
on 19 Mar, 2019 11:18
-
I've been lurking around the metrology subforum for some time, so I guess this might be a "coming out of the closet" post for me. I would like to attent. Both options are ok for me, 24/25 May or 31/1.
I'd bring a Keithley 2000 and a Fluke 8505A. And probably lots of cash in case there will be some impromptuu fleamarket thing.
Nothing like some TEA therapy, eh?
-
#24 Reply
Posted by
branadic
on 16 Apr, 2019 12:42
-
SAVE THE DATE
01.06.2019, 9:00 - 17:00Uhr
Further details coming soon.
If you can deliver a speech, please contact me.
-branadic-