Author Topic: Pic tutorials  (Read 4264 times)

0 Members and 1 Guest are viewing this topic.

Offline Radio TechTopic starter

  • Frequent Contributor
  • **
  • Posts: 960
  • Country: us
  • KC4UMO Buddy
    • Hobby Forum
Pic tutorials
« on: April 13, 2013, 02:31:00 am »
So I Got a pickit2 clone. I downloaded MBlab and sourceboost IDE.
At the moment I have nothing to program or play around with. So I am reading bit and pieces  when I can find time.

I am a complete noob to this. So have a lot to learn before I can even get to know my programmer.
I like the sourceboost software over MBlab but what I do not like is I can only run it on one pc. Which is the one I downloaded it on in the shop.

Anyway, if folks can recomend simple to follow guides on learning this please post some links. I have looked over so much latley that did not make a lot of sence that it get very overwhelming.  :scared:

I need to start off with some small projects and work my way up.

Offline David_AVD

  • Super Contributor
  • ***
  • Posts: 2958
  • Country: au
Re: Pic tutorials
« Reply #1 on: April 13, 2013, 02:39:03 am »
 

Offline westfw

  • Super Contributor
  • ***
  • Posts: 4668
  • Country: us
Re: Pic tutorials
« Reply #2 on: April 13, 2013, 03:25:29 am »
http://www.voti.nl/swp/index_1.html#target
http://www.winpicprog.co.uk/pic_tutorial.htm
You might want to look into Microchip's online training options as well.
 

Offline Radio TechTopic starter

  • Frequent Contributor
  • **
  • Posts: 960
  • Country: us
  • KC4UMO Buddy
    • Hobby Forum
Re: Pic tutorials
« Reply #3 on: April 13, 2013, 11:41:41 am »
Thanks David_AVD for that link


http://www.voti.nl/swp/index_1.html#target
http://www.winpicprog.co.uk/pic_tutorial.htm
You might want to look into Microchip's online training options as well.

Those are nice. Lots of info.
I already downloaded a bunch of stuff from microchip. A lot of stuff to learn.

I spent some time looking through the piled of old electronic stuff I have laying around in hope to find something with a microcontroller in to rob and play with. Did not find much other than Atmel’s

Last year I bought a lot of electronic components.  Lots of IC’s in the load plus sockets, LED’s, headers with crystals and resistors soldered to them and a few ZIF sockets.  I really need to sort this stuff and see if any of it is useful.  There was one chip that caught my eye.  It is a 40 pin white chip with gold pins and a big gold square in the center.  Has AY-5-1012 and below that 7319. These are General Instruments and I understand they are vintage.  I know this has nothing to do with the thread but interesting.

Anyway keep the idea’s coming.

Offline rolycat

  • Super Contributor
  • ***
  • Posts: 1103
  • Country: gb
Re: Pic tutorials
« Reply #4 on: April 13, 2013, 02:34:43 pm »
I really need to sort this stuff and see if any of it is useful.  There was one chip that caught my eye.  It is a 40 pin white chip with gold pins and a big gold square in the center.  Has AY-5-1012 and below that 7319. These are General Instruments and I understand they are vintage.  I know this has nothing to do with the thread but interesting.

That chip is historically interesting, but unlikely to be useful. It's a UART from the early eighties, and there don't seem to be any datasheets online. This is as much information as I could track down:

AY5-1012
Peripheral Controller - Full Duplex,20k Baud(320kHz Clock)min
V(IL) Max.(V)Lo Level In.Volt.=0.8
V(IH) Min.(V)Hi Level In.Volt.=3.5
P(D) Max.(W) Power Dissipation=224m
Vsup(-) Nom.(V) Neg.Sup.Volt.=12
Vsup(+) Nom.(V) Pos.Sup.Volt.=5.0
Status=Discontinued
Package=DIP
Pins=40
Military=N
Technology=PMOS


« Last Edit: April 13, 2013, 04:25:37 pm by rolycat »
 

Offline Radio TechTopic starter

  • Frequent Contributor
  • **
  • Posts: 960
  • Country: us
  • KC4UMO Buddy
    • Hobby Forum
Re: Pic tutorials
« Reply #5 on: April 13, 2013, 04:06:32 pm »
I really need to sort this stuff and see if any of it is useful.  There was one chip that caught my eye.  It is a 40 pin white chip with gold pins and a big gold square in the center.  Has AY-5-1012 and below that 7319. These are General Instruments and I understand they are vintage.  I know this has nothing to do with the thread but interesting.

That chip is historically interesting, but unlikely to be useful. It's a UART from the early eighties, and there don't seem to any datasheets online. This is as much information as I could track down:

AY5-1012
Peripheral Controller - Full Duplex,20k Baud(320kHz Clock)min
V(IL) Max.(V)Lo Level In.Volt.=0.8
V(IH) Min.(V)Hi Level In.Volt.=3.5
P(D) Max.(W) Power Dissipation=224m
Vsup(-) Nom.(V) Neg.Sup.Volt.=12
Vsup(+) Nom.(V) Pos.Sup.Volt.=5.0
Status=Discontinued
Package=DIP
Pins=40
Military=N
Technology=PMOS

Yep I agree.  I did read an article this morning that they were used in one of the Tandy computers and were calle "The Fun Chip" Interesting old stuff.


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

- - -
-->