Author Topic: ground loop detection  (Read 1897 times)

0 Members and 1 Guest are viewing this topic.

Offline bug13Topic starter

  • Regular Contributor
  • *
  • Posts: 58
  • Country: nz
ground loop detection
« on: March 07, 2016, 07:55:31 pm »
Hi guys

I am looking for a solution to detect ground loop. I came cross this one:

http://www.loopslooth.com/how%20to%20find%20ground%20loop.html

Have anyone use this? or try something like this? I think it will work, but how well it work?

Thanks guys

Zhuhua Wu
A guy who creates stories to tell machines to do stuff.
 

Offline dwpatter53

  • Contributor
  • Posts: 34
  • Country: ca
Re: ground loop detection
« Reply #1 on: March 14, 2016, 06:51:29 am »
Our electricians have used an industrial versions to find ground faults like these;
http://www.multi-tech-industries.com/gfault.html
http://www.eepowersolutions.com/categories/ground-fault-monitoring-detection/?gclid=Cj0KEQiAvJS3BRDd44fjndyii6MBEiQAN4EkPQi9NJyOXubaawHSHBjAL4KhKGxImgeT3vulUhNce64aAvDJ8P8HAQ

I would see if an electrical test equipment dealer would loan or demo it for you.

It can be a difficult task depending how crowded and buried with other cabling is the circuit you are trying to trace.


Good luck
Dave P.Eng. BScEE
Super Control Engineer retired
 
The following users thanked this post: bug13


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 

- - -
-->