Electronics > RF, Microwave, Ham Radio
schottkys instead of germanium diodes for crystal radios?
ali6x944:
schottkys instead of germanium diodes for crystal radios, is it working or a bug I got?
alsetalokin4017:
--- Quote from: ali6x944 on February 07, 2016, 06:37:11 pm ---schottkys instead of germanium diodes for crystal radios, is it working or a bug I got?
--- End quote ---
I've tried it a few times and they can work OK but germanium is better.
Schottky: 1n5711 etc.
Germanium: 1n34a, 1n60, etc.
Ian.M:
Small signal Germanium diodes are usually point contact so have very low junction capacitance. If substituting a Schottky diode you'd specifically need a low capacitance one designed for RF use.
Macbeth:
Do it properly with a cats whisker ;)
KJDS:
The cheap solution
http://www.infineon.com/dgdl/Infineon-BAT63SERIES-DS-v01_01-en.pdf?fileId=db3a304314dca38901151817843c0df4
Avago and others do expensive zero bias schottky diodes that may be better, but probably not worth teh extra cost for most.
Navigation
[0] Message Index
[#] Next page
Go to full version