THANK YOU VERY MUCH !I JUST ENTERED IT BUT THE PROMPT IS INVALID,I M NOT SURE IF THIS OPTION REQUIRES OCXO SUPPORT!
I MADE A PCB COMPONENT AND IT S STILL BEING SHIPPED TRY DIY AGAIN IN A FEW DAYS ..THANK YOU AGAIN
I HAD SOME TIME THIS AFTERNOON TO BOOK 4411 FOR A WHILE...I SUDDENLY REALIZED THAT I HAD MADE A MISTAKE WITH THE ENDING NUMBER.IT S "A"NOT "B" I M REALLY SORRY
FOLLOW THE MANUAL EARLIER .DIY ONE AT WILL.VERIFY IF IT CAN WORK,IT S TOO UGLY,,CUSTOMIZED PCB ARE STILL ON THE WAY,,,
"A" or "B" should not make a difference. Do you get an error message when you enter the license key? If so, what exactly does it say?
dire paopbz it"s a bit not convinced,i tried aging successful,my steps are incorrect,1:enter option code 2:enter the license key and 3:load it successful. no need for oxco hardware support successfully added the same very good thank you
by the way may i ask how to add an option to the ESA-L1500A series without an ID number compared to the first level of 4411?
by the way may i ask how to add an option to the ESA-L1500A series without an ID number compared to the first level of 4411?
I have no idea, the option keys I can generate are based on the HOSTID so if you don't have that I'm afraid I can't help.
HELL PAOPBZ SEEING CABLE FAULT LOCATION FUNCTION IS A PRACTICAL FEATURE FOR HAM
225
226
227
228
J36
THANK YOU
Hi BG8IP,
The key generation I offer is for hobby use, and you have already showed 3 different models so I'm not sure if this qualifies as hobby.
Also a tip: if you are having problems reading or writing English, find someone who can help you.
YES I HAVE 1500 UNITS MYSELF 4402 PER UNIT 4411 PER UNIT THE ELECTRONICS FACTORY IS CLOSING DOWN I BOUGHT IT BACK
Dear PA0PBZ
I have a E4407B Spectrum Analyzer, Model:E4407B ESA-E, Host ID: 855050AD.
I would like to install the 226 Phase noise personality.
Thanks
I have a E4407B Spectrum Analyzer, Model:E4407B ESA-E, Host ID: 855050AD.
I would like to install the 226 Phase noise personality.
This should do the trick: 7F680E518DBA