Author Topic: Rigol's New DHO800 Oscilloscope unbox & teardown (Read 269871 times)

Azusa · « **on:** July 17, 2023, 02:25:39 am »

DHO804

Azusa · « **Reply #1 on:** July 17, 2023, 02:29:02 am »

The power supply.12V 4A with TYPE-C.it looks so cheap....

Azusa · « **Reply #2 on:** July 17, 2023, 02:32:23 am »

4x PVP2150 1/10X switchable probes

Azusa · « **Reply #3 on:** July 17, 2023, 02:36:26 am »

The backside

Azusa · « **Reply #4 on:** July 17, 2023, 02:49:57 am »

power up & about
it based on android 7.1.2 system.

Azusa · « **Reply #5 on:** July 17, 2023, 03:08:07 am »

WTF...
When i adjust minimum vertical division，it has a large ripple at 55KHz and large noice....
I guess it may come from power supply.

Azusa · « **Reply #6 on:** July 17, 2023, 03:10:33 am »

When i place my hand near the channel inputs,the noise become much more like this

Azusa · « **Reply #7 on:** July 17, 2023, 03:15:11 am »

It support PD.I replaced power supply for it from my samsung notebook.Now it looks fine.

Azusa · « **Reply #8 on:** July 17, 2023, 03:28:40 am »

The original power supply,it sucks.This is the cheapest power supply without any fliter....

Azusa · « **Reply #9 on:** July 17, 2023, 03:34:34 am »

The backside of the mainboard.There is a TF card near RJ45 port.It’s the system rom.

Azusa · « **Reply #10 on:** July 17, 2023, 03:42:38 am »

remove the heatsink

Azusa · « **Reply #11 on:** July 17, 2023, 03:45:04 am »

The RK3399 CPU and memories

Azusa · « **Reply #12 on:** July 17, 2023, 03:54:50 am »

The Xilinx ZYNQ XC7Z015 Main FPGA.and a 4Gbits ddr3l dram from gigadevice,and the two empty dram for DHO900?

Azusa · « **Reply #13 on:** July 17, 2023, 04:02:09 am »

RT8847IQ 2GS/s ADC.the same with DHO1000/4000.
it may limited to 1.25GS/s by software?

Azusa · « **Reply #14 on:** July 17, 2023, 04:03:18 am »

RT1642IQ Front End. the same with DHO1000/4000 too.

Azusa · « **Reply #15 on:** July 17, 2023, 04:05:42 am »

the other side of mainboard

Azusa · « **Reply #16 on:** July 17, 2023, 04:07:11 am »

front panel without logic analyzer port

Azusa · « **Reply #17 on:** July 17, 2023, 04:16:26 am »

The AFG for DHO9x4S is a pluggin module.The LA port is directly connect to the main fpga.
The other component looks all populated,
so DHO800 uphack to DHO900 may need to solder up two drams and LA port only and flash the system?

ataradov · « **Reply #18 on:** July 17, 2023, 05:25:55 am »

I really hope external power supplies don't become a thing. Who cares if your product is small if you still have to carry random stuff around.

slavoy · « **Reply #19 on:** July 17, 2023, 07:14:40 am »

Is this power supply some kind of joke? But after replacing it with a decent one, it seems to be okay. Unfortunately, I can only see a thumbnail on the forum, and when I enlarge the image, it shows a different one.
However, I wouldn't worry too much about it. It's cheap, so the first step would be to replace the power supply. Anyway it's a surprising move, it reminds me that cheap usb "thing" from FNIRSI

Aldo22 · « **Reply #20 on:** July 17, 2023, 08:37:17 am »

Thanks for the tear down.

Does anyone know when this device will be available in Europe?

EDIT: In the meantime I got a reply from batterfly:

Quote from: batterfly

Hello, we hope to have them listed into our website https://www.batterfly.com for sale within October 2023.

ataradov · « **Reply #21 on:** July 17, 2023, 03:42:59 pm »

It would be though gray marked for sure. Officially - it would be strange, but if some retailers can make a deal, it would be nice.

Martin72 · « **Reply #22 on:** July 17, 2023, 05:12:21 pm »

October 2023...Time enough to polish some things.

thm_w · « **Reply #23 on:** July 18, 2023, 10:02:23 pm »

If the power supply has a type-C connector, then its likely non-compliant as its constantly outputting 12V and will blow up your equipment?

Either way probably some junk thrown in by the seller or a temporary solution for a PSU. No way the real scope would ship with that. Still, indicates lack of filtering within the scope itself.

Previous thread: https://www.eevblog.com/forum/testgear/rigol-dho800900-pre-sales-begin/

Fungus · « **Reply #24 on:** July 18, 2023, 11:07:51 pm »

Quote from: thm_w on July 18, 2023, 10:02:23 pm

If the power supply has a type-C connector, then its likely non-compliant as its constantly outputting 12V and will blow up your equipment?

Nope. Type-C can output many different voltages. You can negotiate with the supply and tell it how many volts you want.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: Rigol's New DHO800 Oscilloscope unbox & teardown (Read 269871 times)

Share me