Maybe it is also useful to name the FW the DG8XX was originally delivered with?
Could it be, that the DG8XXies originally shipped with 1.09, got a special "implementation"?
Naaaa... My DG came as 1.08.
Downgrade. Set the original S/N and model = "DG992", explicitly with my 1st procedure. Then try again the upgrade. Or after setting things, flash a FW previous to 2.04 and then 2.04.
Don't do any operation with the S/N DG9... No need to invent.
After upgrade from FW 1.08 to FW 2.04 , does the "DG992" can output 100MHz without any problem?
After upgrade from FW 1.08 to FW 2.04 , does the "DG992" can output 100MHz without any problem?yes
For me, there is still a problem at 100MHz.
PushUp did you have sucess?
sorry work keeps me from important things
Yes all changes S/N & Model with magic-usbstick
...
what is the difference?
:PROJect:SN (26 Bytes)
:PROJ:SN (23 Bytes)
This thread is going to lose me some coin soon
DG822 landed on my doorstep today from Telonic here in the UK with the 1.08 firmware on it still
Alas no upgrade fun because there wasn't a USB cable in the damn box
[Updated Contents]
v00.02.04.00.00 2020-02-18
- Add open source declaration in help UI
- Solve the problem of address error in ultralab heartbeat server configuration
- Solve the bug that the relay output instantaneous voltage error after setting offset
Haven't checked this thread for a few weeks, interesting developments
I found the new firmware, Rigol wants you to log in but if you look at the HTML you simply find a direct link to the RAR file: https://www.rigol.eu/Public/Uploads/uploadfile/files/ftp/DG/软固件/SardineII(ARM)Update-v00.02.04.00.00.rar
My original FW was 1.09.
I used TV84's downgrade to 1.08, got a DG992 and reprogrammed my serial number afterwards.
Life was good (well, until the world fell apart)
Today, I flashed the TV84-1.08 to 2.04 and it came back as DG811 with original serial number.
I then re-flashed with TV84's downgrade and came back to 1.08, regained my DG992 model but did not lose my serial number this time!
Hello,
got my DG821 this week and I really enjoy it.
I have tried to ugrade it to a DG832 but it doesn't want to. Also any other upgrade have no effect.
SW version 00.01.08.00.01
I have done the steps from tv84 post #147 and used a RaspberryPi with raspian to write the bin file to the formatted USB drive (2GB). Also tried it with HxD on my Windows laptop, but after entering the SCPI code :PROJ:MODE DG832 and restarting the DG it says still 821.
Has anybody a glue what I am doing wrong?
Many thanks in advance!
Hi!
i have a Rigol DG811 and i am trying to hack it!
i have follow the steps of TV84 but nothing!
my sn is 1.08 its the old version!
i format the flash drive (32gb) via windows i change at 2000000sector to 0B 0A 3B 2E 5F 4C EC BE with HxD and with r&s visa
i send the command :PROJ:MODE DG992 ... but nothing
thanks in advance!!!