romPost: I am alive .
uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
romPost: L2 cache turned on.
romPost: MPC107
romPost: I am alive .
uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
romPost: L2 cache turned on.
romPost: MPC107 Walking-one passed.
romPost: MPC107 configuration passed.
romPost: Intel21555 PCITOPCI bridge configuration passed.
romPost: PERFORMING ROM CHECKSUM TEST...
romPost: ROM checksum passed.
romPost: PERFORMING DRAM CELL TEST...
romPost: Enabling data cache...
romPost: Data cache enabled.
romPost: Enabling instruction cache...
romPost: Instruction cache enabled.
romPost: DRAM Cell test passed.
romPost: PERFORMING DRAM MARCH TEST WITH CACHE OFF...
romPost: Disabling data Cache...
romPost: Data cache disabled.
romPost: Disabling instruction cache...
romPost: Instruction cache disabled.
romPost: Writing address to each *address...
romPost: Reading address from each *address...
romPost: DRAM march test passed...
romPost: PERFORMING DRAM MARCH TEST WITH CACHE ON...
romPost: Enabling data cache...
romPost: Data cache enabled.
romPost: Enabling instruction cache...
romPost: Instruction cache enabled.
romPost: Writing address to each *address...
romPost: Reading address from each *address...
romPost: DRAM march test passed...
romPost: PERFORMING DRAM WALKING-ONE TEST...
romPost: DRAM Walking-one test passed.
romPost: PERFORMING NV-MEMORY WALKING-ONE TEST...
romPost: NV-MEMORY Walking-one test passed.
romPost: Disabling data Cache...
romPost: Data cache disabled.
romPost: Disabling instruction cache...
romPost: Instruction cache disabled.
romPost: Enabling instruction cache...
romPost: Instruction cache enabled.
romPost: POWER-UP DIAGNOSTIC COMPLETE.
Hel
VxWorks System Boot
Copyright 1984-1996 Wind River Systems, Inc.
CPU: Tektronix HPP - IBM 750CXe
Version: 5.3.1
BSP version: 2.0.1.10
Creation date: Sep 30 2003, 07:53:07
Press any key to stop auto-boot...
0
auto-booting...
boot device : sm
processor number : 0
file name : c:/vxboot/vxWorks.st
inet on backplane (b): 192.168.0.1:ffffff00
host inet (h) : 192.168.0.2
gateway inet (g) : 192.168.0.1
flags (f) : 0x1008
target name (tn) : tds7000
startup script (s) : c:/vxboot/topscript.hw
Initializing backplane net with anchor at 0x1e80000... done.
Backplane anchor at 0x1e80000... Attaching network interface sm0... done
-rwxrwxrwx 1 matt users 150528 Jun 19 2003 arcldr.exe
-rwxrwxrwx 1 matt users 163840 Jun 19 2003 arcsetup.exe
-rwxrwxrwx 1 matt users 0 Jul 2 2003 AUTOEXEC.BAT
-rwxrwxrwx 1 matt users 213 Sep 23 2003 boot.ini
-rwxrwxrwx 1 matt users 0 Jul 2 2003 CONFIG.SYS
drwxrwxrwx 1 matt users 248 Oct 10 2003 Documents and Settings
drwxrwxrwx 1 matt users 86 Jul 2 2003 Inetpub
-rwxrwxrwx 1 matt users 0 Jul 2 2003 IO.SYS
-rwxrwxrwx 1 matt users 0 Jul 2 2003 MSDOS.SYS
-rwxrwxrwx 1 matt users 34724 Jun 19 2003 NTDETECT.COM
-rwxrwxrwx 1 matt users 214432 Jun 19 2003 ntldr
-rwxrwxrwx 1 matt users 805306368 Oct 20 2003 pagefile.sys
drwxrwxrwx 1 matt users 656 Oct 14 2003 Program Files
drwxrwxrwx 1 matt users 250 Oct 10 2003 RECYCLER
-rwxrwxrwx 1 matt users 453 Jul 8 2003 Shortcut to Embedded Console.lnk
drwxrwxrwx 1 matt users 24 Jul 2 2003 System Volume Information
drwxrwxrwx 1 matt users 602 Oct 10 2003 Tektronix
drwxrwxrwx 1 matt users 2396 Oct 11 2003 WINNT
drwxrwxrwx 1 matt users 154 Jul 22 2004 APP7_TDSDAS_17_JUN18
-rwxrwxrwx 1 matt users 150528 Jun 19 2003 arcldr.exe
-rwxrwxrwx 1 matt users 163840 Jun 19 2003 arcsetup.exe
-rwxrwxrwx 1 matt users 136 Jan 9 2003 AUTOEXEC.BAT
-rwxrwxrwx 1 matt users 222 Sep 18 2003 boot.ini
drwxrwxrwx 1 matt users 8 Sep 18 2003 Cabs
-rwxrwxrwx 1 matt users 0 Jan 10 2003 CONFIG.SYS
drwxrwxrwx 1 matt users 150 Jan 28 2003 Documents and Settings
-rwxrwxrwx 1 matt users 1211 Feb 20 2001 Embedded Console.ht
drwxrwxrwx 1 matt users 114 Jan 10 2003 Inetpub
-rwxrwxrwx 1 matt users 0 Jan 10 2003 IO.SYS
-rwxrwxrwx 1 matt users 0 Jan 10 2003 MSDOS.SYS
-rwxrwxrwx 1 matt users 755 Jul 22 2004 msildbg.log
-rwxrwxrwx 1 matt users 34724 Jul 22 2002 NTDETECT.COM
-rwxrwxrwx 1 matt users 214432 Sep 10 2003 ntldr
-rwxrwxrwx 1 matt users 805306368 Nov 16 2020 pagefile.sys
drwxrwxrwx 1 matt users 28 Jul 22 2004 Plugins
drwxrwxrwx 1 matt users 1032 Apr 5 2007 Program Files
-rwxrwxrwx 1 matt users 10155 Feb 23 2001 RAD_HD.EXE
-rwxrwxrwx 1 matt users 860 Feb 13 2001 RADSCAN.EXE
drwxrwxrwx 1 matt users 178 Jan 28 2003 RECYCLER
drwxrwxrwx 1 matt users 24 Jan 10 2003 System Volume Information
drwxrwxrwx 1 matt users 94 Feb 5 2004 TekApplications
drwxrwxrwx 1 matt users 60 Apr 5 2007 TekScope
drwxrwxrwx 1 matt users 314 Sep 18 2003 Tektronix
drwxrwxrwx 1 matt users 0 Feb 5 2004 Temp
drwxrwxrwx 1 matt users 296 Apr 5 2007 vxBoot
drwxrwxrwx 1 matt users 10 Feb 4 2004 VXIpnp
drwxrwxrwx 1 matt users 8 Sep 12 2003 Windows
drwxrwxrwx 1 matt users 3920 Apr 10 2020 WINNT
check autoexec.bat and config.sys, boot.ini by editing them, would be stupid to point to another partition ? normally vxboot / vxwork is on the main C:\ ??
i would copy the good vxwork folder ... worth a try ?
@echo off
c:\RAD_HD.EXE
REM This is the CMOS Restore Program.
REM It will restore CMOS settings to factory
REM recommended settings.
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect /kernel=ntoskrn1.exe
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect /bootlog /kernel=ntoskrn1.exe
Tektronix
├── Adobe
│ └── AR505enu.exe
├── Audio 5.10.3686
│ ├── 5.10.3686.certified.exe
│ ├── data1.cab
│ ├── data1.hdr
│ ├── data2.cab
│ ├── delcabs.bat
│ ├── iac97k4.sys
│ ├── iac97u4.dll
│ ├── ich
│ │ ├── nt4
│ │ │ ├── iac97k4.sys
│ │ │ ├── iac97u4.dll
│ │ │ ├── oemsetup.inf
│ │ │ └── setupnt4.dll
│ │ └── wdm
│ │ ├── setuphlp.dll
│ │ ├── stac97.cat
│ │ ├── stac97.inf
│ │ └── stac97.sys
│ ├── ikernel.ex_
│ ├── layout.bin
│ ├── oemsetup.inf
│ ├── setup.bmp
│ ├── setup.exe
│ ├── setuphlp.dll
│ ├── setup.ini
│ ├── setup.inx
│ ├── setup.iss
│ ├── setupnt4.dll
│ ├── stac97.cat
│ ├── stac97.inf
│ ├── stac97.log
│ ├── stac97.sys
│ ├── stacconfig.exe
│ ├── stfindcs.sys
│ ├── stfndcsd.dll
│ ├── stfndcsv.vxd
│ └── st_inst.ini
├── Chips and Tech display V.2.50G
│ ├── Chips2Kd.dll
│ ├── chips2k.inf
│ ├── Chips2Km.sys
│ ├── CHIPSDAN.HLP
│ ├── CHIPSDEU.HLP
│ ├── CHIPSDSP.HLP
│ ├── CHIPSDSP.ICO
│ ├── CHIPSESP.HLP
│ ├── CHIPSFIN.HLP
│ ├── CHIPSFRA.HLP
│ ├── CHIPSITA.HLP
│ ├── CHIPSJPN.HLP
│ ├── CHIPSNLD.HLP
│ ├── CHIPSNON.HLP
│ ├── CHIPSPTB.HLP
│ ├── ChpGamma.dll
│ ├── ChpsPtrt.exe
│ ├── chpstart.exe
│ ├── CNTNTDSP.DLL
│ ├── desc.txt
│ ├── DISK1
│ ├── install.txt
│ └── LICENSE.TXT
├── ClickNBurn
│ ├── Autorun.dxr
│ ├── AUTORUN.INF
│ ├── CNBP2
│ │ ├── Autorun
│ │ │ ├── Ar.bmp
│ │ │ ├── Ar.exe
│ │ │ ├── Ar.ico
│ │ │ ├── Ar.ini
│ │ │ └── vssver.scc
│ │ ├── Autorun.inf
│ │ ├── Click'N Burn Pro 2.0 (English) Setup.exe
│ │ ├── Click'N Burn Pro 2.0 (French) Setup.exe
│ │ ├── Click'N Burn Pro 2.0 (German) Setup.exe
│ │ ├── Click'N Burn Pro 2.0 (Italian) Setup.exe
│ │ ├── Click'N Burn Pro 2.0 (Spanish) Setup.exe
│ │ ├── Readme.txt
│ │ └── Shortcut to Click'N Burn Pro 2.0 (English) Setup.exe.lnk
│ ├── CnD3d
│ │ ├── CUSTDATA.INI
│ │ ├── manual.pdf
│ │ ├── setup.exe
│ │ └── vssver.scc
│ ├── CnESLE
│ │ ├── setup.exe
│ │ └── vssver.scc
│ ├── PxEngineUpdate342.exe
│ ├── Serial Number.txt
│ ├── StompProjector.exe
│ ├── vdla
│ │ ├── DLA.msi
│ │ ├── HISTORY.BLD
│ │ ├── Ins9XMsi.exe
│ │ ├── InsNTMsi.exe
│ │ ├── mfc42.dll
│ │ ├── msvcrt.dll
│ │ ├── pconfig.dcf
│ │ ├── readme.txt
│ │ ├── Setup.exe
│ │ ├── Setup.ini
│ │ ├── urldata.ini
│ │ └── vssver.scc
│ └── vsb
│ ├── buildnfo.txt
│ ├── data10.cab
│ ├── data1.cab
│ ├── data1.hdr
│ ├── data2.cab
│ ├── data3.cab
│ ├── data4.cab
│ ├── data5.cab
│ ├── data6.cab
│ ├── data7.cab
│ ├── data8.cab
│ ├── data9.cab
│ ├── DATA.TAG
│ ├── drvwcdb.vxd
│ ├── fconfig.dcf
│ ├── HISTORY.BLD
│ ├── _INST32I.EX_
│ ├── _ISDel.exe
│ ├── lang.dat
│ ├── layout.bin
│ ├── license.ENU
│ ├── os.dat
│ ├── pconfig.dcf
│ ├── pnpninst.exe
│ ├── pnpwtape.exe
│ ├── readme.er
│ ├── readme.txt
│ ├── rptENU.zip
│ ├── _Setup.dll
│ ├── Setup.exe
│ ├── SETUP.INF
│ ├── SETUP.INI
│ ├── setup.ins
│ ├── setup.lid
│ ├── _sys1.cab
│ ├── _sys1.hdr
│ ├── urldata.ini
│ ├── _user1.cab
│ ├── _user1.hdr
│ └── vssver.scc
├── Embedded Console.ht
├── Front Panel V.1.0
│ ├── TekFPUsb.inf
│ └── TekFPUsb.sys
├── INF_Intel 82801DB ICH4
│ └── infinst_enu.exe
├── Intel Application Accelerator 2.3
│ ├── iaa23_enu.exe
│ └── Readme.txt
├── Lan 6.4C0735
│ ├── APPS
│ │ ├── PROSet
│ │ │ └── WIN2K
│ │ │ ├── 1028.mst
│ │ │ ├── 1030.mst
│ │ │ ├── 1031.mst
│ │ │ ├── 1033.mst
│ │ │ ├── 1034.mst
│ │ │ ├── 1035.mst
│ │ │ ├── 1036.mst
│ │ │ ├── 1040.mst
│ │ │ ├── 1041.mst
│ │ │ ├── 1042.mst
│ │ │ ├── 1043.mst
│ │ │ ├── 1044.mst
│ │ │ ├── 1046.mst
│ │ │ ├── 1053.mst
│ │ │ ├── 2052.mst
│ │ │ ├── ANSMW2K.INF
│ │ │ ├── ANSMXP.INF
│ │ │ ├── ANSPW2K.INF
│ │ │ ├── ANSPXP.INF
│ │ │ ├── iansmsg.dll
│ │ │ ├── iansw2k.cat
│ │ │ ├── iansw2k.sys
│ │ │ ├── ianswxp.cat
│ │ │ ├── ianswxp.sys
│ │ │ ├── PROSet.exe
│ │ │ ├── PROSet.msi
│ │ │ └── s8023Dev.Reg
│ │ ├── SETUP
│ │ │ └── SETUPBD
│ │ │ └── W98-XP32
│ │ │ ├── NetInst.dll
│ │ │ ├── SetBDRes.dll
│ │ │ ├── SetupBD.exe
│ │ │ └── SetupBD.ini
│ │ └── TOOLS
│ │ ├── DIAG1000.EXE
│ │ ├── diag100.exe
│ │ ├── IDADAPT.EXE
│ │ └── IDADAPT.TXT
│ ├── license.rtf
│ ├── MakeDisk
│ │ └── Make2KXP.bat
│ ├── PRO100
│ │ ├── WIN2K
│ │ │ ├── e100bmsg.dll
│ │ │ ├── e100bnt5.cat
│ │ │ ├── e100bnt5.din
│ │ │ ├── e100bnt5.inf
│ │ │ ├── e100bnt5.sys
│ │ │ ├── intelnic.dll
│ │ │ └── PROUnstl.exe
│ │ └── WINXP32
│ │ ├── e100b325.cat
│ │ ├── e100b325.din
│ │ ├── e100b325.inf
│ │ ├── e100b325.sys
│ │ ├── e100bmsg.dll
│ │ ├── intelnic.dll
│ │ └── PROUnstl.exe
│ ├── PRO1000
│ │ ├── WIN2K
│ │ │ ├── e1000msg.dll
│ │ │ ├── e1000nt5.cat
│ │ │ ├── e1000nt5.din
│ │ │ ├── e1000nt5.inf
│ │ │ ├── E1000NT5.SYS
│ │ │ ├── intelnic.dll
│ │ │ └── PROUnstl.exe
│ │ └── WINXP32
│ │ ├── e1000325.cat
│ │ ├── e1000325.din
│ │ ├── e1000325.inf
│ │ ├── E1000325.sys
│ │ ├── e1000msg.dll
│ │ ├── intelnic.dll
│ │ └── PROUnstl.exe
│ ├── Readme.txt
│ ├── RelNotes.rtf
│ ├── Setup.exe
│ ├── v6.4_PRO2KXP_only.exe
│ └── verfile.tic
├── Semtec Touch Screen Calibrator V.1.00.70.1
│ ├── CALIBR.CPL
│ ├── INSTALL.EXE
│ ├── rathook.dll
│ ├── RATPTR.EXE
│ ├── TSCREEN.INF
│ └── TSCRLF.SYS
├── Tektronix Custom Drivers
│ └── v 1.11 Service
│ ├── dbfs.sys
│ ├── dblib.sys
│ ├── dbWdm.inf
│ ├── dbWdm.sys
│ ├── DIOSERVICE.exe
│ └── Readme.txt
├── tvia
│ ├── dpms.scr
│ ├── igscp.ini
│ ├── IGSDISP.dll
│ ├── IGSMINI.sys
│ ├── IGSMM.SYS
│ ├── IGSMW32.500
│ ├── IGSMW32.520
│ ├── IGSMW32.522
│ ├── IGSMW32.530
│ ├── IGSMW32.560
│ ├── igspsp.dll
│ ├── IGS_TEK.INF
│ ├── IGSVCAP.SYS
│ ├── README.TXT
│ ├── RMIGAVID.500
│ ├── RMIGAVID.520
│ ├── RMIGAVID.522
│ ├── RMIGAVID.530
│ ├── RMIGAVID.560
│ ├── TVIAHLP_tek.cnt
│ ├── TVIAHLP_tek.HLP
│ ├── Tviahlp_x86.cnt
│ ├── Tviahlp_x86.HLP
│ ├── TviaHook.dll
│ ├── TVIA_MV.500
│ ├── TVIA_MV.520
│ ├── TVIA_MV.522
│ ├── TVIA_MV.530
│ └── TviaSrv.exe
├── ver 30518p
│ ├── installnotes.doc
│ ├── MAINDIR1.cab
│ ├── readme.txt
│ ├── Setup.exe
│ └── SYSDIR1.cab
├── Version P16 Bios
│ └── BIOS FILES
│ ├── AUTOEXEC.BAT
│ ├── BEEP.COM
│ ├── BIOS.REC
│ ├── DESC.TXT
│ ├── DISKIMG.EXE
│ ├── EXECUTE.BAT
│ ├── IFLASH.EXE
│ ├── LICENSE.TXT
│ ├── LOGODATA.USR
│ ├── Make a P16 Disk.IMA
│ ├── P16-0040.BI1
│ ├── P16-0040.BI2
│ ├── P16-0040.BI3
│ ├── P16-0040.BI4
│ ├── P16-0040.BI5
│ ├── P16-0040.BI6
│ ├── P16-0040.BIO
│ ├── P16-0040.ITK
│ ├── P16-0040.SIG
│ ├── README.TXT
│ ├── RUN.BAT
│ ├── SW
│ │ ├── DESC.TXT
│ │ ├── DISKIMG.EXE
│ │ ├── LICENSE.TXT
│ │ ├── LY86AP16IB.EXE
│ │ ├── P16-0040.ITK
│ │ ├── README.TXT
│ │ ├── RUN.BAT
│ │ └── SW.EXE
│ ├── SW.EXE
│ └── TOKEN
└── Video_Intel Extreme Graphics 6.13.01.3317
├── autorun.inf
├── Graphics
│ ├── data1.cab
│ ├── data1.hdr
│ ├── data2.cab
│ ├── ikernel.ex_
│ ├── Install.cfg
│ ├── layout.bin
│ ├── Setup.exe
│ ├── Setup.ini
│ ├── setup.inx
│ ├── setup.iss
│ ├── Support
│ │ ├── shpshftr.dll
│ │ └── SignTime.dll
│ └── Win2000
│ ├── a302.cat
│ ├── a302.inf
│ ├── a302.sys
│ ├── a303.cat
│ ├── a303.inf
│ ├── a303.sys
│ ├── a304.cat
│ ├── a304.inf
│ ├── a304.sys
│ ├── a305.cat
│ ├── a305.inf
│ ├── a305.sys
│ ├── a306.cat
│ ├── a306.inf
│ ├── a306.sys
│ ├── a307.cat
│ ├── a307.inf
│ ├── a307.sys
│ ├── a308.cat
│ ├── a308.inf
│ ├── a308.sys
│ ├── a309.cat
│ ├── a309.inf
│ ├── a309.sys
│ ├── a310.cat
│ ├── a310.inf
│ ├── a310.sys
│ ├── a311.cat
│ ├── a311.inf
│ ├── a311.sys
│ ├── a312.cat
│ ├── a312.inf
│ ├── a312.sys
│ ├── hccutils.dll
│ ├── hkcmd.exe
│ ├── i830mnt5.cat
│ ├── ialmcoin.dll
│ ├── ialmdd5.dll
│ ├── ialmdev5.dll
│ ├── ialmdnt5.dll
│ ├── ialmgdev.dll
│ ├── ialmgicd.dll
│ ├── ialmkchw.sys
│ ├── ialmnt5.inf
│ ├── ialmnt5.sys
│ ├── ialmrem.dll
│ ├── ialmrnt5.dll
│ ├── ialmsbw.sys
│ ├── igfxcfg.exe
│ ├── igfxcpl.cpl
│ ├── igfxdev.dll
│ ├── igfxdgps.dll
│ ├── igfxdiag.exe
│ ├── igfxdo.dll
│ ├── igfxeud.dll
│ ├── igfxhara.lhp
│ ├── igfxharb.lhp
│ ├── igfxhchs.lhp
│ ├── igfxhcht.lhp
│ ├── igfxhcsy.lhp
│ ├── igfxhdan.lhp
│ ├── igfxhdeu.lhp
│ ├── igfxhell.lhp
│ ├── igfxheng.lhp
│ ├── igfxhenu.lhp
│ ├── igfxhesp.lhp
│ ├── igfxhfin.lhp
│ ├── igfxhfra.lhp
│ ├── igfxhfrc.lhp
│ ├── igfxhheb.lhp
│ ├── igfxhhun.lhp
│ ├── igfxhita.lhp
│ ├── igfxhjpn.lhp
│ ├── igfxhk.dll
│ ├── igfxhkor.lhp
│ ├── igfxhnld.lhp
│ ├── igfxhnor.lhp
│ ├── igfxhplk.lhp
│ ├── igfxhptb.lhp
│ ├── igfxhptg.lhp
│ ├── igfxhrus.lhp
│ ├── igfxhsve.lhp
│ ├── igfxhtha.lhp
│ ├── igfxhtrk.lhp
│ ├── igfxpph.dll
│ ├── igfxrara.lrc
│ ├── igfxrarb.lrc
│ ├── igfxrchs.lrc
│ ├── igfxrcht.lrc
│ ├── igfxrcsy.lrc
│ ├── igfxrdan.lrc
│ ├── igfxrdeu.lrc
│ ├── igfxrell.lrc
│ ├── igfxreng.lrc
│ ├── igfxrenu.lrc
│ ├── igfxresp.lrc
│ ├── igfxress.dll
│ ├── igfxrfin.lrc
│ ├── igfxrfra.lrc
│ ├── igfxrfrc.lrc
│ ├── igfxrheb.lrc
│ ├── igfxrhun.lrc
│ ├── igfxrita.lrc
│ ├── igfxrjpn.lrc
│ ├── igfxrkor.lrc
│ ├── igfxrnld.lrc
│ ├── igfxrnor.lrc
│ ├── igfxrplk.lrc
│ ├── igfxrptb.lrc
│ ├── igfxrptg.lrc
│ ├── igfxrrus.lrc
│ ├── igfxrsve.lrc
│ ├── igfxrtha.lrc
│ ├── igfxrtrk.lrc
│ ├── igfxsrvc.dll
│ ├── igfxtray.exe
│ ├── ikch8xx.cat
│ ├── ikch8xx.inf
│ ├── isb8xx.cat
│ ├── isb8xx.inf
│ ├── oemdspif.dll
│ ├── shpshftr.dll
│ ├── vch.cat
│ ├── Vch.inf
│ ├── Vch.sys
│ ├── wa301a.cat
│ ├── wa301a.inf
│ ├── wa301a.sys
│ ├── wa301b.cat
│ ├── wa301b.inf
│ └── wa301b.sys
├── ReadMe.txt
└── win2k_xp.exe
file name : c:/vxboot/vxWorks.st
inet on backplane (b): 192.168.0.1:ffffff00
host inet (h) : 192.168.0.2
gateway inet (g) : 192.168.0.1
flags (f) : 0x1008
target name (tn) : tds7000
startup script (s) : c:/vxboot/topscript.hw
have you checked in the device manager if all is ok, any exclamation mark, it could spoil everything ?? the pc side must be perfect ...
https://xdevs.com/doc/Tektronix/CSA7404/
Almost at the end you have : tds2.5.3_2008.06.09.10.42.00_5150_EN.exe
And 3x VxBoot folder archives or backup copies .....
OR
https://dev.xdevs.com/projects/csa7404/files
------------------------------------------------------------
tds7k zipped file : https://www.jabse.com/dl2.php?file=L1Rla3Ryb25peC9DU0E3NDA0L1REUzcwMDAyay56aXA-not sure if this one is a bull backup or setup files etc ....
It is an full os reinsallation iso and the win2k sp4 ...
You mean windows does not boot completly ??
Hum well
i would say, format everything, re-install everything, be sure the OS is fully operational, and install the tek stuff after being sure you dont have any problems in the device manager
The known problem with the p16 bios was the graphic (even mentioned here on another thread) initialization in the bios, sometimes it would not set to internal PCI ... that was resolved on the P25 ...
ill check the 2 links you provided
Hum made by powerquest
and one file mention tds5k in it ? not even sure it's the good images for your scope ?
I would redo a full os install say from an genuine w2k cd-rom, or the tds7k zip file link i've sent you, you have an os iso in it and the w2k sp4 in it, even the os serial is there ...
$ unzip TDS70002k.zip
Archive: TDS70002k.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of TDS70002k.zip or
TDS70002k.zip.zip, and cannot find TDS70002k.zip.ZIP, period.
Burn an cd-rom at 4x ... low speed
For the serial you should have the sticker on the casing
Your posted cdrom listing / index / folders have the needed drivers you will be able to use
Normally you will need the vga drivers, the touch screen drivers, front panel drivers, lan, audio, ICH (intel chipset) ... and the one for the TVIA board something loll the one who link the scope side to the pc ...
the p25 bios can be upgraded from a windows os ... if i recall it can wait until you have a fully working os
Do you have a separated "normal" ATX computer board and a agp/pci slot separated interface board, or you have one edge of the mainboard who slot in a backplane board on the side
I'm sometimes confused between the A and B models, since you wrote an non B model loll
But OS side is the same
If the cd-rom is ok you should be able to boot from it ... win2k ones where bootable if i recall
Xdev's tds7000 non B softwares and drivers ??
https://xdevs.com/doc/Tektronix/TDS7000/
you have a "rem tds5k" note in the autoexec.bat of the second iso file you provided
@ECHO OFF
REM Use for TDS5K Ashland